Gizmo-2.0
koreem-ahmed·Gizmo-2.0·PCB/Gizmo 2.0.kicad_pcb
About the Gizmo-2.0 PCB
Gizmo-2.0 is an open source ESP32 PCB design by koreem-ahmed, published on GitHub under the MIT license. It is a 2-layer board measuring 96.2 × 73.6 mm, with 16 components from 14 distinct parts.
Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 3 connectors, 2 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
It is a small desk robot that acts as an AI companion. Gizmo 2.0 can help you organize your thoughts, and you can give him any question, and he will answer. Also, it is provided with a mic for voice and music recognition, and it has 2 servo motors for dancing and interaction.
Gizmo was made after a lot of research and thinking i had like a really long time seeing totorial and example on the internet to see how to make a moving AI companian and which MCU to get and what could be its abailities so i used ESP32-S3 as the main MCU, inmp441 as a microphone, a speaker, 2 servo motors and a customed PCB to hold every thing together.
There is another good reaseon for building Gizmo which is the amount of memories and thoughsts i gave into biulding it. Since this is my last project before attendign fallout which is a hackathon organized by Hack Club in shenzhen and i…
Main components on the Gizmo-2.0
Gizmo-2.0 bill of materials (BOM)
16 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 2 | 18650 batery | PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | speakers | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 2S 8.4V 2A 18650 Battery Charger | TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | BMS1 |
| 1 | BMS 2S 13A Protection Board | TerminalBlock_MetzConnect_Type059_RT06305HBWC_1x05_P3.50mm_Horizontal | BMS2 |
| 1 | XL4015 Step Down | TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal | BMS3 |
| 1 | AMS1117 3.3V Step-Down | PinHeader_1x03_P2.54mm_Vertical | BMS6 |
| 1 | ILI9341 2.8" SPI TFT LCD Display | ILI9341 SPI display | display2 |
| 2 | 1.3 kg Servo motor | PinSocket_1x03_P2.54mm_Vertical | motor1, motor2 |
| 1 | TTP223 Capacitive Touch Sensor | PinSocket_1x03_P2.54mm_Vertical | sensor2 |
| 1 | i2s amplifier (max 98357) | max 98357 i2s amplifier | sound2 |
| 1 | inm441 microphone | inm441 Speaker | sound3 |
| 1 | 0.1 uf | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 470 uf | CP_Radial_D6.3mm_P2.50mm | C2 |
Gizmo-2.0 design files
The KiCad project lives in the koreem-ahmed/Gizmo-2.0 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Gizmo 2.0.kicad_pcb
- SchematicPCB/Gizmo 2.0.kicad_sch
- BOMBOM.csv
Gizmo-2.0: common questions
What microcontroller does the Gizmo-2.0 use?
The Gizmo-2.0 is built around the ESP32-S3-DevKitC, from the ESP32 family.
How big is the Gizmo-2.0 PCB?
The Gizmo-2.0 measures 96.2 × 73.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gizmo-2.0?
16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gizmo-2.0 design files?
From the koreem-ahmed/Gizmo-2.0 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gizmo-2.0 design in my own project?
Yes, under the terms of its MIT license, which koreem-ahmed chose for the repository.
Can I test firmware for the Gizmo-2.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k