Sensor
Kreyl·Generation·Sensor_hw/Sensor.kicad_pcb
About the Sensor PCB
Sensor is an open source PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 27 × 31 mm, with 22 components from 8 distinct parts.
By type, the board carries 5 capacitors, 4 transistors and 4 resistors.
It belongs with the sensors designs in this gallery.
Sensor bill of materials (BOM)
22 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSOP48xx | TSOP48xx_Horiz | Q1 |
| 2 | TSOP48xx | TSOP48xx | Q2, Q3 |
| 1 | LED_RGB_WS2812B | LED_WS2812B | Q4 |
| 1 | HOLE_METALLED | Hole3d3_out5d5mm | HOLE1 |
| 8 | CONN_1 | Oval6x3 | XL1, XL2, XL3, XL4, XL5, XL6, XL7, XL8 |
| 4 | 0.1u | CAP_0603 | C1, C2, C3, C4 |
| 1 | 10u | CAP_0805 | C5 |
| 4 | 100R | RES_0603 | R1, R2, R3, R4 |
Sensor design files
The KiCad project lives in the Kreyl/Generation repository on GitHub; these links point at the commit this page was built from.
Sensor: common questions
How big is the Sensor PCB?
The Sensor measures 27 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor?
22 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor design files?
From the Kreyl/Generation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sensor design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
More boards in Generation
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956