5-Volt-Buck with-UVLO
KrHaaland·5-Volt-Buck-with-UVLO
About the 5-Volt-Buck with-UVLO PCB
5-Volt-Buck with-UVLO is an open source PCB design by KrHaaland, published on GitHub. It is a 2-layer board measuring 40 × 18 mm, with 21 components from 12 distinct parts.
Other key parts include the TPS62933DRLR. By type, the board carries 11 capacitors, 6 resistors, 2 connectors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
5 Volt Buck with UVLO
A small 12 V to 5 V USB power adapter with an adjustable under-voltage lockout (UVLO), built around the TI TPS62933 3 A synchronous buck converter.
It is meant for 12 V lead-acid systems (car, boat, cabin). The 5 V output switches off when the battery sags to roughly 12.2 V and does not come back until the battery is being charged again (roughly 13.3 V), so the adapter cannot flatten the battery.

Main components on the 5-Volt-Buck with-UVLO
5-Volt-Buck with-UVLO bill of materials (BOM)
21 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS62933DRLR | TPS62933 | U1 |
| 1 | C2765055 Wago 2060-452 | Wago 2060-452 | J1 |
| 1 | 292303-1 | 292303-1 | J2 |
| 1 | 74439387068 7070_74439387068 Wurth Elektronik | 744393465068 | L1 |
| 7 | 10UF 10uF | C_1206_3216Metric | C1, C2, C6, C7, C9, C10, C11 |
| 3 | 100NF 100nF | C_0805_2012Metric | C3, C5, C8 |
| 1 | 33NF 33nF | C_0805_2012Metric | C4 |
| 1 | 511K | R_0805_2012Metric | R1 |
| 1 | 88.7K | R_0805_2012Metric | R2 |
| 2 | 0 ohm | R_0805_2012Metric | R3, R4 |
| 1 | 53.6K 53.6k | R_0805_2012Metric | R6 |
| 1 | 10.2K 10.2k | R_0805_2012Metric | R7 |
5-Volt-Buck with-UVLO design files
The KiCad project lives in the KrHaaland/5-Volt-Buck-with-UVLO repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB-Adapter.kicad_pcb
- SchematicUSB-Adapter.kicad_sch
- BOMproduction/bom.csv
5-Volt-Buck with-UVLO: common questions
How big is the 5-Volt-Buck with-UVLO PCB?
The 5-Volt-Buck with-UVLO measures 40 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5-Volt-Buck with-UVLO?
21 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 5-Volt-Buck with-UVLO design files?
From the KrHaaland/5-Volt-Buck-with-UVLO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 5-Volt-Buck with-UVLO design in my own project?
The repository has no license, so all rights stay with KrHaaland. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k