ESP32-Epaper-Weather-Station
kuoku49·ESP32-Epaper-Weather-Station·docs/smart_portable_weather_station/smart_portable_weather_station.kicad_pcb
About the ESP32-Epaper-Weather-Station PCB
ESP32-Epaper-Weather-Station is an open source ESP32 PCB design by kuoku49, published on GitHub. It is a 2-layer board measuring 95 × 82 mm, with 2 components from 2 distinct parts.
Its main chip is the ESP32_30pin, from the ESP32 family. By type, the board carries 1 IC and 1 switch.
It belongs with the displays & leds, sensors and iot & wireless designs in this gallery.
From the project
An ESP32 and 2.9" ePaper Display with BME280 sensor that fetches real-time weather via the Open-Meteo API, displays environmental data, and pushes telemetry to InfluxDB/Grafana while optimized for ultra-low power via Deep Sleep.
An IoT-based smart weather station built with ESP32, utilizing an E-Ink display for low power consumption. The device monitors indoor environmental data and fetches outdoor weather from REST APIs, pushing telemetry data to InfluxDB and Grafana for remote monitoring.

ESP32-Epaper-Weather-Station bill of materials (BOM)
2 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP32_30pin | U3 |
| 1 | SS-12D00-G 4 E | 1P2T_SS-12D00_CNK | SW1 |
ESP32-Epaper-Weather-Station design files
The KiCad project lives in the kuoku49/ESP32-Epaper-Weather-Station repository on GitHub; these links point at the commit this page was built from.
ESP32-Epaper-Weather-Station: common questions
What microcontroller does the ESP32-Epaper-Weather-Station use?
The ESP32-Epaper-Weather-Station is built around the ESP32_30pin, from the ESP32 family.
How big is the ESP32-Epaper-Weather-Station PCB?
The ESP32-Epaper-Weather-Station measures 95 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Epaper-Weather-Station?
2 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-Epaper-Weather-Station design files?
From the kuoku49/ESP32-Epaper-Weather-Station repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-Epaper-Weather-Station design in my own project?
The repository has no license, so all rights stay with kuoku49. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Epaper-Weather-Station without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k