PCB Project
KVentayen·CSU-Chico-PCB-Project·PCB Project/PCB Project 3/PCB Project.kicad_pcb
About the PCB Project
PCB Project is an open source PCB design by KVentayen, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 21 components from 5 distinct parts.
Other key parts include the TL084. By type, the board carries 12 resistors, 4 diodes, 3 connectors and 2 ICs.
It belongs with the power & battery designs in this gallery.
From the project
This is the basis for a PCB Workshop at Chico State, Computer and Electrical Engineering Department.
[Comment]: <> (Inline Comment) [//]: <> (This is also a comment) [//]: # (This is also a comment)
https://www.ti.com/lit/ds/symlink/lf347-n.pdf?ts=1685703512723
TL084CN (JFET-Input Operational Amplifiers)
https://www.mouser.com/ProductDetail/STMicroelectronics/TL084CN?qs=vqk%252BPKT8fSxJW2aTIl98LQ%3D%3D
https://www.mouser.com/datasheet/2/389/tl084ac-1383769.pdf
https://datasheetspdf.com/pdf/133245/FairchildSemiconductor/1N4148/1
Main components on the PCB Project
PCB Project bill of materials (BOM)
21 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL084 | DIP-14_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 12 | R_Small | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
PCB Project design files
The KiCad project lives in the KVentayen/CSU-Chico-PCB-Project repository on GitHub; these links point at the commit this page was built from.
PCB Project: common questions
How big is the PCB Project?
The PCB Project measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB Project?
21 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB Project design files?
From the KVentayen/CSU-Chico-PCB-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB Project design in my own project?
The repository has no license, so all rights stay with KVentayen. Use it as a reference, and ask the author before reusing the design.
More boards in CSU-Chico-PCB-Project
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k