Overdrive
kyledenobel·RGA_Boards·Overdrive/Overdrive/Overdrive.kicad_pcb
About the Overdrive PCB
Overdrive is an open source PCB design by kyledenobel, published on GitHub. It is a 4-layer board measuring 51.6 × 32 mm, with 43 components from 23 distinct parts.
Other key parts include the TL071HIDBVR, AD5160, ADP7118AUJZ-4.5-R7 and AD8400ARZ1. By type, the board carries 15 capacitors, 14 resistors, 6 ICs, 5 diodes, 2 transistors and 1 connector.
It belongs with the audio designs in this gallery.
From the project
PCB Board design and development for RGA (Recording Guitar Amplifier)
Main components on the Overdrive
Overdrive bill of materials (BOM)
43 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TL071HIDBVR | TL071HIDBVR | U1, U3, U6 |
| 1 | AD5160 | SOT-23-8 | U2 |
| 1 | ADP7118AUJZ-4.5-R7 | UJ-5_ADI | U4 |
| 1 | AD8400ARZ1 | R_8_ADI | U5 |
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 1 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 5 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5 |
| 2 | 2.2U 2.2u | C_0603_1608Metric | C1, C2 |
| 8 | 1u | C_0603_1608Metric | C3, C6, C9, C11, C12, C13, C14, C15 |
| 3 | 22U 22u | C_0603_1608Metric | C4, C7, C10 |
| 1 | 100U 100u | C_1206_3216Metric | C5 |
| 1 | 0.3U 0.3u | C_0603_1608Metric | C8 |
| 3 | 10K 10k | R_0603_1608Metric | R1, R2, R5 |
| 1 | 1M | R_0603_1608Metric | R3 |
| 2 | 1k | R_0603_1608Metric | R4, R10 |
| 1 | 100K 100k | R_0603_1608Metric | R6 |
| 1 | 130K 130k | R_0603_1608Metric | R7 |
| 1 | 18K 18k | R_0603_1608Metric | R8 |
| 1 | 100 | R_0603_1608Metric | R9 |
| 1 | 40K 40k | R_0603_1608Metric | R11 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 36K 36k | R_0603_1608Metric | R12 |
| 1 | 6.2K 6.2k | R_0603_1608Metric | R13 |
| 1 | 9k | R_0603_1608Metric | R14 |
Overdrive design files
The KiCad project lives in the kyledenobel/RGA_Boards repository on GitHub; these links point at the commit this page was built from.
Overdrive: common questions
How big is the Overdrive PCB?
The Overdrive measures 51.6 × 32 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Overdrive?
43 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Overdrive design files?
From the kyledenobel/RGA_Boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Overdrive design in my own project?
The repository has no license, so all rights stay with kyledenobel. Use it as a reference, and ask the author before reusing the design.
More boards in RGA_Boards
STM32
BigMuffRipOff
kyledenobel
50.8 × 84 mm86 parts4LNo license0Phase90
kyledenobel
58.4 × 32 mm75 parts4LNo license0STM32
Analog Controller
kyledenobel
76.2 × 71.1 mm72 parts4LNo license0Pre Amp Stage
kyledenobel
76.2 × 40.6 mm39 parts4LNo license0Digital and recording
kyledenobel
47 × 106.3 mm36 parts4LNo license0Power Amp Board
kyledenobel
103.6 × 60.6 mm31 parts4LNo license0Power Board
kyledenobel
132.1 × 30.5 mm9 parts4LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687