Pre Amp Stage
kyledenobel·RGA_Boards·Pre Amp Stage/Pre Amp Stage.kicad_pcb
About the Pre Amp Stage PCB
Pre Amp Stage is an open source PCB design by kyledenobel, published on GitHub. It is a 4-layer board measuring 76.2 × 40.6 mm, with 39 components from 25 distinct parts.
Other key parts include the AC025-D24, TMA-1215D and TL071HIDBVR. By type, the board carries 15 capacitors, 11 resistors, 8 connectors, 4 ICs and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
PCB Board design and development for RGA (Recording Guitar Amplifier)
Main components on the Pre Amp Stage
Pre Amp Stage bill of materials (BOM)
39 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AC025-D24 TL071HIDBVR | TL071 | U1 |
| 1 | TMA-1215D | Converter_DCDC_TRACO_TMA-05xxD_12xxD_Dual_THT | U2 |
| 2 | TL071HIDBVR | TL071 | U3, U4 |
| 1 | Q_NJFET_DSG | TO-92_Inline | Q1 |
| 1 | MEGAFIT-2-VERT NMJ6HFD2 | Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J1 |
| 3 | MINIFIT-2-VERT Conn_01x03 | Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J2, J3, J7 |
| 1 | MEGAFIT-2-VERT MINIFIT-2-VERT | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J4 |
| 1 | Conn_01x03 | Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J5 |
| 1 | MEGAFIT-2-VERT Conn_01x03 | Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J6 |
| 1 | MINIFIT-2-VERT | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J8 |
| 1 | 68p | R_0603_1608Metric | C1 |
| 2 | 10u | R_0603_1608Metric | C2, C7 |
| 1 | 47n | R_0603_1608Metric | C3 |
| 1 | 940p | R_0603_1608Metric | C4 |
| 1 | 0.0047u | R_0603_1608Metric | C5 |
| 1 | 680p | R_0603_1608Metric | C6 |
| 6 | 1u | R_0603_1608Metric | C8, C9, C10, C11, C13, C14 |
| 1 | 220p | R_0603_1608Metric | C12 |
| 1 | 100u | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C15 |
| 1 | 499k | R_0603_1608Metric | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100 | R_0603_1608Metric | R2 |
| 1 | 50k | R_0603_1608Metric | R3 |
| 4 | 7.5k | R_0603_1608Metric | R4, R6, R7, R9 |
| 2 | 2.7k | R_0603_1608Metric | R5, R8 |
| 2 | 100k | R_0603_1608Metric | R10, R11 |
Pre Amp Stage design files
The KiCad project lives in the kyledenobel/RGA_Boards repository on GitHub; these links point at the commit this page was built from.
Pre Amp Stage: common questions
How big is the Pre Amp Stage PCB?
The Pre Amp Stage measures 76.2 × 40.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pre Amp Stage?
39 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pre Amp Stage design files?
From the kyledenobel/RGA_Boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pre Amp Stage design in my own project?
The repository has no license, so all rights stay with kyledenobel. Use it as a reference, and ask the author before reusing the design.
More boards in RGA_Boards
STM32
BigMuffRipOff
kyledenobel
50.8 × 84 mm86 parts4LNo license0Phase90
kyledenobel
58.4 × 32 mm75 parts4LNo license0STM32
Analog Controller
kyledenobel
76.2 × 71.1 mm72 parts4LNo license0Overdrive
kyledenobel
51.6 × 32 mm43 parts4LNo license0Digital and recording
kyledenobel
47 × 106.3 mm36 parts4LNo license0Power Amp Board
kyledenobel
103.6 × 60.6 mm31 parts4LNo license0Power Board
kyledenobel
132.1 × 30.5 mm9 parts4LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687