HardLabs

Monitoreo solar

Laboratorio-Robotica-UTN-Fra·Monitor_solar·monitoreo_solar/monitoreo_solar.kicad_pcb

Monitoreo solar PCB layout, top view — open source board by Laboratorio-Robotica-UTN-Fra

About the Monitoreo solar PCB

Monitoreo solar is an open source PCB design by Laboratorio-Robotica-UTN-Fra, published on GitHub. It is a 2-layer board measuring 50 × 45 mm, with 21 components from 16 distinct parts.

Other key parts include the X9C103S, AMS1117-3.3 and LM358. By type, the board carries 7 resistors, 5 connectors, 4 capacitors, 3 ICs and 2 diodes.

It belongs with the power & battery designs in this gallery.

From the project

Se utilizara una placa para tomar la tension y corriente de un panel, escalarla a valores entre 3v3 y 0v para poder utilizar un ADC para realizar la lectura de datos

Proyecto para mostrar los valores de tension y corriente de un sistema solar

- code/ - Archivos de codigo para esp8266. - Componentes/ - Documentacion y archivos de simbolos para kicad. - img/ - Imagenes del proyecto - README.md - Explicacion del proyecto.

2. Follow instructions in docs/ to set up and run the project.

Main components on the Monitoreo solar

X9C103SAMS1117-3.3LM358

Monitoreo solar bill of materials (BOM)

21 components, 16 distinct parts.

QtyPartRefs
1
X9C103S
U1
1
AMS1117-3.3
U2
1
LM358
U4
2
Screw_Terminal_01x02
J1, J3
1
Conn_01x03_Socket
J2
1
Conn_01x04_Pin
J4
1
Conn_01x03_Pin
J5
2
1N5822
D1, D2
2
1u
C1, C2
2
10u
C4, C5
1
22k
R1
1
10k
R2
2
4.7k
R3, R4
1
1.5k
R9
1
2.2k
R10
1
100k
R11

Monitoreo solar design files

The KiCad project lives in the Laboratorio-Robotica-UTN-Fra/Monitor_solar repository on GitHub; these links point at the commit this page was built from.

Monitoreo solar: common questions

How big is the Monitoreo solar PCB?

The Monitoreo solar measures 50 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Monitoreo solar?

21 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Monitoreo solar design files?

From the Laboratorio-Robotica-UTN-Fra/Monitor_solar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Monitoreo solar design in my own project?

The repository has no license, so all rights stay with Laboratorio-Robotica-UTN-Fra. Use it as a reference, and ask the author before reusing the design.

More boards in Monitor_solar

Similar boards