Digiobscura mcu

lachlanchen·CustomSensor·PCB/mcu/digiobscura_mcu.kicad_pcb

Digiobscura mcu PCB layout, top view — open source Microchip SAM board by lachlanchen

About the Digiobscura mcu PCB

Digiobscura mcu is an open source Microchip SAM PCB design by lachlanchen, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 43 components from 31 distinct parts.

Its main chip is the ADG732BSUZ-REEL, from the Microchip SAM family. Other key parts include the SPX3819-3.3V and MCP73812T. By type, the board carries 13 capacitors, 9 resistors, 7 connectors, 4 diodes, 3 ICs and 2 switches.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

digiOBSCURA - A DIY Image Sensor and Digital Camera 📷

Main components on the Digiobscura mcu

Digiobscura mcu bill of materials (BOM)

43 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADG732BSUZ-REEL
SAMD21G18A_ArduinoSimple
Analog Devices Inc.
U1
1
SPX3819-3.3V
U3
1
MCP73812T
U4
1
Crystal_Small
Y1
1
77311-818-11LF
Conn_01x02
Amphenol ICC (FCI)
J1
1
77311-818-11LF
ROW
Amphenol ICC (FCI)
J2
1
COL
J3
1
Micro_SD_Card_Det
J4
1
Conn_01x08
J11
1
USB_OTG
P1
1
CONN_01X07
P2
1
BATT1
BT1
1
500mA
F1
1
SW_PUSH
RST1
1
R_POT
RV1
1
SW_Push_SPDT
SW1
1
SW_Push
SW2
1
LED_Small
D1
2
MBR230L
D2, D3
1
CHRG
D6
Show 11 more
QtyPartRefs
2
CL21F104ZAANNNC
0.1uF
Samsung Electro-Mechanics
C1, C3
2
CL21F104ZAANNNC
22pF
Samsung Electro-Mechanics
C2, C4
3
0.1uF
C5, C11, C12
3
1uF
C6, C7, C8
1
2.2uF
C9
2
4.7uF
C14, C15
1
100k
R1
3
4.7K
R2, R4, R8
2
10k
R3, R5
2
1k
R7, R22
1
6.8k
R21

Digiobscura mcu design files

The KiCad project lives in the lachlanchen/CustomSensor repository on GitHub; these links point at the commit this page was built from.

Digiobscura mcu: common questions

What microcontroller does the Digiobscura mcu use?

The Digiobscura mcu is built around the ADG732BSUZ-REEL, from the Microchip SAM family.

How big is the Digiobscura mcu PCB?

The Digiobscura mcu measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digiobscura mcu?

43 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digiobscura mcu design files?

From the lachlanchen/CustomSensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Digiobscura mcu design in my own project?

Yes, under the terms of its AGPL-3.0 license, which lachlanchen chose for the repository.

Can I test firmware for the Digiobscura mcu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in CustomSensor

Similar boards