Digiobscura
lachlanchen·CustomSensor·PCB/image_sensor/digiobscura.kicad_pcb
About the Digiobscura PCB
Digiobscura is an open source PCB design by lachlanchen, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 99 × 77 mm, with 1032 components from 5 distinct parts.
Other key parts include the ADG732BSUZ-REEL. By type, the board carries 1024 transistors, 4 capacitors, 2 ICs and 2 connectors.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
digiOBSCURA - A DIY Image Sensor and Digital Camera 📷
If you're reading this, it means I have started a new project but have neglected to update the README file. Please notify me of this by any means possible.
Twitter: @idlehandsdev Instagram: @idlehandsdev
Since you're reading this, go check out my YouTube Channel! http://youtube.com/seanhodginsfilms
Main components on the Digiobscura
Digiobscura bill of materials (BOM)
1032 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADG732BSUZ-REEL ADG732 Analog Devices Inc. | TQFP-48_7x7mm_P0.5mm | U1, U2 |
| 1024 | ALS-PT19-315C/L177/TR8 ALS-PT19 Everlight Electronics Co Ltd | ALS-PT19 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +1016 |
| 1 | 77311-818-11LF ROW Amphenol ICC (FCI) | PinHeader_1x11_P2.54mm_Vertical | J1 |
| 1 | 77311-818-11LF COL Amphenol ICC (FCI) | PinHeader_1x11_P2.54mm_Vertical | J2 |
| 4 | CL21F104ZAANNNC 0.1uF Samsung Electro-Mechanics | C_0805_2012Metric | C1, C2, C3, C4 |
Digiobscura design files
The KiCad project lives in the lachlanchen/CustomSensor repository on GitHub; these links point at the commit this page was built from.
Digiobscura: common questions
How big is the Digiobscura PCB?
The Digiobscura measures 99 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digiobscura?
1032 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Digiobscura design files?
From the lachlanchen/CustomSensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Digiobscura design in my own project?
Yes, under the terms of its AGPL-3.0 license, which lachlanchen chose for the repository.
More boards in CustomSensor
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k