La4440
lahirunirmalx·la4440-stereo-amp·kicad/la4440.kicad_pcb
About the La4440 PCB
La4440 is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 90 × 70 mm, with 44 components from 26 distinct parts.
Other key parts include the LA4440. By type, the board carries 15 resistors, 14 capacitors, 6 connectors, 2 transistors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
LA4440 2 x 4 W stereo amp: volume header ready for X9C104 digital pots, toggle / GPIO mute, KiCad 9 board generated from scripts, ngspice-verified (not built yet)
A 2 x 4 W stereo amplifier around the Sanyo LA4440, designed from parts in a hobby bin. Volume is a dual 100k linear pot on a 6-pin header that two X9C104 digital pots can replace later without touching the board; mute works from a panel toggle now and from a microcontroller pin later, wired in parallel. Every number below comes from ngspice. No board has been built or measured yet.

Main components on the La4440
La4440 bill of materials (BOM)
44 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LA4440 | SIP14H_LA4440 | U1 |
| 1 | 2N3904 | TO92_SOT23 | Q1 |
| 1 | 2N5401 | TO92_SOT23 | Q2 |
| 1 | LINE IN L/GND/R | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | VOLUME / CONTROL | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | MUTE SWITCH | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DC IN +/- | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | SPEAKER L | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | SPEAKER R | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 4 | M2.5 | Hole_2.5mm | H1, H2, H3, H4 |
| 1 | Q1 2N3904 pinout field | JQ_3x4 | JQ1 |
| 1 | Q2 2N5401 pinout field | JQ_3x4 | JQ2 |
| 5 | 47u 50V | CP_Radial_D8.0mm_P3.50mm | C1, C2, C10, C13, C14 |
| 3 | 1000u 25V | CP_Radial_D12.5mm_P5.00mm | C3, C4, C9 |
| 2 | 0.1u film | C_Rect5_1206 | C5, C6 |
| 3 | 2200u 25V | CP_Radial_D12.5mm_P5.00mm | C7, C8, C11 |
| 1 | 0.1u | C_Rect5_1206 | C12 |
| 3 | 10k | R_Axial_1206 | R3, R4, R11 |
| 2 | 5.6k | R_Axial_1206 | R5, R6 |
| 2 | 470 | R_Axial_1206 | R7, R8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.8k | R_Axial_1206 | R9 |
| 1 | 47k | R_Axial_1206 | R10 |
| 1 | 4.7k | R_Axial_1206 | R12 |
| 1 | 100k | R_Axial_1206 | R13 |
| 2 | 10R 1W (R1 pair) | R_Axial10_2512 | R14, R15 |
| 2 | 10R 1W (R2 pair) | R_Axial10_2512 | R16, R17 |
La4440 design files
The KiCad project lives in the lahirunirmalx/la4440-stereo-amp repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/la4440.kicad_pcb
- Schematickicad/la4440.kicad_sch
- BOMbom.md
La4440: common questions
How big is the La4440 PCB?
The La4440 measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the La4440?
44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the La4440 design files?
From the lahirunirmalx/la4440-stereo-amp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the La4440 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in la4440-stereo-amp
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687