La4440-panel-2up
lahirunirmalx·la4440-stereo-amp·kicad/panel/la4440-panel-2up.kicad_pcb
About the La4440-panel-2up PCB
La4440-panel-2up is an open source PCB design by lahirunirmalx, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 90 × 142.1 mm, with 44 components from 26 distinct parts.
Other key parts include the LA4440. By type, the board carries 15 resistors, 14 capacitors, 6 connectors, 2 transistors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
LA4440 2 x 4 W stereo amp: volume header ready for X9C104 digital pots, toggle / GPIO mute, KiCad 9 board generated from scripts, ngspice-verified (not built yet)
A 2 x 4 W stereo amplifier around the Sanyo LA4440, designed from parts in a hobby bin. Volume is a dual 100k linear pot on a 6-pin header that two X9C104 digital pots can replace later without touching the board; mute works from a panel toggle now and from a microcontroller pin later, wired in parallel. Every number below comes from ngspice. No board has been built or measured yet.

Main components on the La4440-panel-2up
La4440-panel-2up bill of materials (BOM)
44 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LA4440 | SIP14H_LA4440 | U1 |
| 1 | 2N3904 | TO92_SOT23 | Q1 |
| 1 | 2N5401 | TO92_SOT23 | Q2 |
| 1 | LINE IN L/GND/R | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | VOLUME / CONTROL | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | MUTE SWITCH | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DC IN +/- | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | SPEAKER L | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | SPEAKER R | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 4 | M2.5 | Hole_2.5mm | H1, H2, H3, H4 |
| 1 | Q1 2N3904 pinout field | JQ_3x4 | JQ1 |
| 1 | Q2 2N5401 pinout field | JQ_3x4 | JQ2 |
| 5 | 47u 50V | CP_Radial_D8.0mm_P3.50mm | C1, C2, C10, C13, C14 |
| 3 | 1000u 25V | CP_Radial_D12.5mm_P5.00mm | C3, C4, C9 |
| 2 | 0.1u film | C_Rect5_1206 | C5, C6 |
| 3 | 2200u 25V | CP_Radial_D12.5mm_P5.00mm | C7, C8, C11 |
| 1 | 0.1u | C_Rect5_1206 | C12 |
| 3 | 10k | R_Axial_1206 | R3, R4, R11 |
| 2 | 5.6k | R_Axial_1206 | R5, R6 |
| 2 | 470 | R_Axial_1206 | R7, R8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.8k | R_Axial_1206 | R9 |
| 1 | 47k | R_Axial_1206 | R10 |
| 1 | 4.7k | R_Axial_1206 | R12 |
| 1 | 100k | R_Axial_1206 | R13 |
| 2 | 10R 1W (R1 pair) | R_Axial10_2512 | R14, R15 |
| 2 | 10R 1W (R2 pair) | R_Axial10_2512 | R16, R17 |
La4440-panel-2up design files
The KiCad project lives in the lahirunirmalx/la4440-stereo-amp repository on GitHub; these links point at the commit this page was built from.
La4440-panel-2up: common questions
How big is the La4440-panel-2up PCB?
The La4440-panel-2up measures 90 × 142.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the La4440-panel-2up?
44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the La4440-panel-2up design files?
From the lahirunirmalx/la4440-stereo-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the La4440-panel-2up design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in la4440-stereo-amp
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687