Uno Shield DSP Class v1
About the Uno Shield DSP Class v1
Uno Shield DSP Class v1 is an open source PCB design by LandryEllis, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 46 components from 20 distinct parts.
Other key parts include the MCP6002-XP. By type, the board carries 27 resistors, 11 connectors, 2 switches, 2 capacitors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Uno Shield DSP Class v1
Uno Shield DSP Class v1 bill of materials (BOM)
46 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002-XP MCP6002-xP | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | IMU_CONN | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | SCREEN_CONN | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | AUDIO_OUT | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | JUMPER | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 2 | AUDIOJACK5 AudioJack5 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J10, J11 |
| 1 | AUDIO_IN | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 3 | 100K 100k | Potentiometer_Bourns_3386P_Vertical | RV1, RV2, RV3 |
| 1 | BT_1 | SW_PUSH_6mm | SW1 |
| 1 | BT_2 | SW_PUSH_6mm | SW2 |
| 1 | 47UF 47uF | CP_Radial_D8.0mm_P2.50mm | C1 |
| 1 | 100PF 100pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 2 | 100K 100k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1, R2 |
| 15 | 20K 20k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R3, R4, R6, R8, R10, R12, R14, R16 +7 |
| 9 | 10K 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R5, R7, R9, R11, R13, R15, R17, R19 +1 |
| 1 | 1k | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R27 |
Uno Shield DSP Class v1 design files
The KiCad project lives in the LandryEllis/ENCE_3210_Landry_Ellis_2026 repository on GitHub; these links point at the commit this page was built from.
Uno Shield DSP Class v1: common questions
How big is the Uno Shield DSP Class v1?
The Uno Shield DSP Class v1 measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uno Shield DSP Class v1?
46 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uno Shield DSP Class v1 design files?
From the LandryEllis/ENCE_3210_Landry_Ellis_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uno Shield DSP Class v1 design in my own project?
The repository has no license, so all rights stay with LandryEllis. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Landry_Ellis_2026
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979