Uno Shield For NASA
About the Uno Shield For NASA
Uno Shield For NASA is an open source PCB design by LandryEllis, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 30 components from 21 distinct parts.
Other key parts include the MCP6002-XP, Humidity_A2, Pressure_A3, ADXL335_XY_A4_A5 and TMP36_External_A1. By type, the board carries 8 test points, 6 diodes, 6 resistors, 5 ICs and 5 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Uno Shield For NASA
Uno Shield For NASA bill of materials (BOM)
30 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002-XP TMP36_Internal_A0 | TO-92_Inline | U1 |
| 1 | Humidity_A2 | LED_D5.0mm | U2 |
| 1 | Pressure_A3 | DIP1330W46P254L1000H544Q8 | U3 |
| 1 | ADXL335_XY_A4_A5 | PinHeader_1x05_P2.54mm_Vertical | U4 |
| 1 | TMP36_External_A1 | TO-92_Inline | U5 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | OpenLog_MicroSD | MODULE_DEV-13955 | J5 |
| 7 | ACC_Z_TestPoint | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4, TP6, TP7, TP8 |
| 1 | GND | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP5 |
| 1 | LED1_Onboard | LED_D5.0mm | D1 |
| 1 | LED2_Onboard | LED_D5.0mm | D2 |
| 1 | LED3_Onboard | LED_D5.0mm | D3 |
| 1 | LED4_Onboard | LED_D5.0mm | D4 |
| 1 | LED5_Remote | LED_D5.0mm | D5 |
| 1 | LED6_Remote | LED_D5.0mm | D6 |
| 2 | 100K 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 3 | 20K 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R6 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
Uno Shield For NASA design files
The KiCad project lives in the LandryEllis/ENCE_3210_Landry_Ellis_2026 repository on GitHub; these links point at the commit this page was built from.
Uno Shield For NASA: common questions
How big is the Uno Shield For NASA?
The Uno Shield For NASA measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uno Shield For NASA?
30 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uno Shield For NASA design files?
From the LandryEllis/ENCE_3210_Landry_Ellis_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uno Shield For NASA design in my own project?
The repository has no license, so all rights stay with LandryEllis. Use it as a reference, and ask the author before reusing the design.
More boards in ENCE_3210_Landry_Ellis_2026
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979