Hw audio box
larus-breeze·hw_audio_box·pcb/soar_audio.kicad_pcb
About the Hw audio box PCB
Hw audio box is an open source STM32 PCB design by larus-breeze, published on GitHub under the Custom license license. It is a 4-layer board measuring 79 × 51 mm, with 116 components from 48 distinct parts.
Its main chip is the HEADER_4, from the STM32 family. Other key parts include the SCT2400, MAX3232, SN65HVD231, PAM8302AAS and BP. By type, the board carries 43 resistors, 32 capacitors, 17 diodes, 11 connectors, 5 ICs and 4 inductors.
It belongs with the audio and sensors designs in this gallery.
From the project
PCB Design Audio generation, temerature and humidity sensing
Main components on the Hw audio box
Hw audio box bill of materials (BOM)
116 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SCT2400 | TSOT-23-6 | U1 |
| 1 | MAX3232 | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm | U2 |
| 1 | SN65HVD231 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | PAM8302AAS | MSOP-8_3x3mm_P0.65mm | U4 |
| 1 | BP | blue_pill | U6 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | RJ45-FLAPS | RJ45_Amphenol_RJHSE5380 | J1 |
| 1 | RJ12-FLAPS | RJ12_Amphenol_54601 | J2 |
| 2 | HEADER_4 | PinHeader_1x04_P1.27mm_Vertical | J3, J6 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | RJ45-CAN | RJ45_Amphenol_RJHSE5380 | J5 |
| 2 | HEADER_2 | PinHeader_1x02_P1.27mm_Vertical | J7, J10 |
| 2 | HEADER_4 | PinHeader_1x04_P2.54mm_Vertical | J8, J9 |
| 1 | HEADER_6 | PinHeader_1x06_P1.27mm_Vertical | J11 |
| 1 | Jumper_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 2 | Jumper_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP5 |
| 1 | D_MM1Z15 | D_SOD-123 | D1 |
| 11 | D_TVS | D_SOD-323 | D2, D4, D5, D6, D12, D13, D14, D15 +3 |
| 5 | D_B5819W | D_SOD-123 | D7, D8, D9, D10, D11 |
| 3 | Ferrite | L_0805_2012Metric | FB1, FB3, FB4 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15u | SLO0630H | L1 |
| 3 | 10u | C_0805_2012Metric | C1, C2, C9 |
| 8 | 100n | C_0603_1608Metric | C3, C7, C10, C24, C25, C27, C28, C29 |
| 1 | 2u2 | C_0805_2012Metric | C4 |
| 9 | 10n | C_0603_1608Metric | C5, C6, C17, C18, C19, C20, C21, C22 +1 |
| 4 | 1u | C_0603_1608Metric | C8, C11, C12, C14 |
| 1 | 10u | C_0603_1608Metric | C13 |
| 2 | 220p | C_0603_1608Metric | C15, C16 |
| 1 | 2n7 | C_0603_1608Metric | C23 |
| 1 | 100p | C_0603_1608Metric | C30 |
| 2 | 47u | C_1206_3216Metric | C31, C32 |
| 9 | 100k | R_0603_1608Metric | R1, R4, R11, R19, R24, R25, R28, R31 +1 |
| 9 | 1k | R_0805_2012Metric | R2, R7, R17, R20, R21, R26, R29, R32 +1 |
| 9 | 1k | R_0603_1608Metric | R3, R8, R18, R22, R23, R27, R30, R33 +1 |
| 1 | 105k | R_0603_1608Metric | R5 |
| 1 | 20k | R_0603_1608Metric | R6 |
| 1 | 68k | R_0603_1608Metric | R9 |
| 1 | 0R | R_0603_1608Metric | R10 |
| 1 | 10k | R_0603_1608Metric | R13 |
| 1 | R120 | R_0603_1608Metric | R14 |
| 2 | 4k7 | R_0603_1608Metric | R15, R16 |
| 2 | 120k | R_0603_1608Metric | R35, R36 |
| 1 | 56k | R_0603_1608Metric | R37 |
| 1 | 30k | R_0603_1608Metric | R38 |
| 1 | 15k | R_0603_1608Metric | R39 |
| 1 | 7k5 | R_0603_1608Metric | R40 |
| 1 | 3k6 | R_0603_1608Metric | R41 |
| 1 | 1k8 | R_0603_1608Metric | R42 |
Hw audio box design files
The KiCad project lives in the larus-breeze/hw_audio_box repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/soar_audio.kicad_pcb
- Schematicpcb/soar_audio.kicad_sch
Hw audio box: common questions
What microcontroller does the Hw audio box use?
The Hw audio box is built around the HEADER_4, from the STM32 family.
How big is the Hw audio box PCB?
The Hw audio box measures 79 × 51 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Hw audio box?
116 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hw audio box design files?
From the larus-breeze/hw_audio_box repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hw audio box design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Hw audio box without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k