TEG

Lazztech·TEG·hardware/TEG.kicad_pcb

TEG PCB layout, top view — open source board by Lazztech

About the TEG PCB

TEG is an open source PCB design by Lazztech, published on GitHub. It is a 2-layer board measuring 107.7 × 84.4 mm, with 33 components from 24 distinct parts.

Other key parts include the BQ25504RGTT and MT3608. By type, the board carries 15 resistors, 8 capacitors, 3 connectors, 2 ICs, 2 diodes and 2 inductors.

It belongs with the power & battery designs in this gallery.

From the project

Electronics for a thermal energy harvesting prototype: a small TEG array feeds a sub-1 V energy-harvesting front-end (BQ25504), which charges a buffer capacitor and backs up a regulated 5 V rail for a Noctua 5 V PWM fan and a test load.

Electronics for a thermal energy harvesting prototype: a small TEG array feeds a sub-1 V energy-harvesting front-end (BQ25504), which charges a buffer capacitor and backs up a regulated 5 V rail for a Noctua 5 V PWM fan and a test load.

Originally drafted on Flux.ai; this repo is the KiCad continuation, prepared for JLCPCB — made and assembled.

Settled — nothing here needs your input.

Main components on the TEG

TEG bill of materials (BOM)

33 components, 24 distinct parts.

QtyPartRefs
1
BQ25504RGTT
U1
1
MT3608
U2
1
AO3400A
Q1
1
TEG_IN
J1
1
FAN_4PIN
J2
1
TEST_LOAD
J3
2
1N5819WS
D1, D2
2
22uH
L1, L2
4
10uF
C1, C4, C5, C6
1
1000uF
C2
2
10nF
C3, C8
1
1uF
C7
1
5.90M
R1
1
4.02M
R2
1
5.60M
R3
2
4.42M
R4, R15
1
0R
R5
1
1.43M
R6
1
4.22M
R7
1
73.2k
R8
Show 4 more
QtyPartRefs
2
10k
R9, R11
1
1k
R10
1
100k
R12
2
10M
R13, R14

TEG design files

The KiCad project lives in the Lazztech/TEG repository on GitHub; these links point at the commit this page was built from.

TEG: common questions

How big is the TEG PCB?

The TEG measures 107.7 × 84.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TEG?

33 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the TEG design files?

From the Lazztech/TEG repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TEG design in my own project?

The repository has no license, so all rights stay with Lazztech. Use it as a reference, and ask the author before reusing the design.

Similar boards