Stm32dev
lbthomsen·stm32dev·pcb/stm32dev.kicad_pcb
About the Stm32dev PCB
Stm32dev is an open source STM32 PCB design by lbthomsen, published on GitHub. It is a 2-layer board measuring 62.2 × 30.5 mm, with 40 components from 25 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the XC6206P332MR and W25Q128JVS. By type, the board carries 14 capacitors, 8 resistors, 7 diodes, 5 connectors, 3 ICs and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Stm32dev
Stm32dev bill of materials (BOM)
40 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206P332MR | SOT-23 | U1 |
| 1 | STM32F405RGTX STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | C115962 16 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0 ~ | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ~ | PinHeader_2x03_P2.54mm_Horizontal | J2 |
| 1 | Micro_SD_Card_Det | microSD_HC_Hirose_DM3D-SF | J3 |
| 2 | ~ | PinHeader_2x20_P2.54mm_Vertical | J4, J5 |
| 2 | C318887 ~ | TS-1088R-02526 | SW1, SW2 |
| 1 | WS2812B WS2812C | LED_WS2812C-2020 | D1 |
| 1 | C8598 ~ | D_SOD-123 | D2 |
| 1 | C72038 GR | LED_0603_1608Metric | D3 |
| 1 | C72041 BLUE | LED_0603_1608Metric | D4 |
| 3 | WS2812C | LED_WS2812C-2020 | D5, D6, D7 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C3 |
| 5 | 100NF 100nF | C_0402_1005Metric | C2, C5, C6, C7, C8 |
| 1 | 1UF 1uF | C_0402_1005Metric | C4 |
| 1 | 10NF 10nF | C_0402_1005Metric | C9 |
| 2 | 20PF 20pF | C_0402_1005Metric | C10, C11 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C12, C13 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF | C_0402_1005Metric | C14 |
| 2 | 10k | R_0402_1005Metric | R1, R5 |
| 2 | 22R | R_0402_1005Metric | R2, R3 |
| 2 | 220 | R_0402_1005Metric | R6, R9 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R7, R8 |
Stm32dev design files
The KiCad project lives in the lbthomsen/stm32dev repository on GitHub; these links point at the commit this page was built from.
Stm32dev: common questions
What microcontroller does the Stm32dev use?
The Stm32dev is built around the STM32F405RGTX, from the STM32 family.
How big is the Stm32dev PCB?
The Stm32dev measures 62.2 × 30.5 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the Stm32dev?
40 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32dev design files?
From the lbthomsen/stm32dev repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Stm32dev design in my own project?
The repository has no license, so all rights stay with lbthomsen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32dev without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k