Bus board
lennartquerter·euro-rack-synth·modules/bus-board/KiCad/bus-board.kicad_pcb
About the Bus board
Bus board is an open source PCB design by lennartquerter, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 300 × 40 mm, with 41 components from 13 distinct parts.
By type, the board carries 14 connectors, 6 diodes, 6 resistors and 3 capacitors.
It belongs with the audio designs in this gallery.
From the project
Lenimal Github for DIY for a Eurorack Synth
see Butch Warns: https://github.com/butchwarns/EurorackBusBoard
Bus board bill of materials (BOM)
41 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | PWR_16 | IDC-Header_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 2 | +5V | power-socket | J7, J14 |
| 2 | GND | power-socket | J8, J11 |
| 2 | +12V | power-socket | J9, J12 |
| 2 | -12V | power-socket | J10, J13 |
| 12 | PWR_10 | IDC-Header_2x05_P2.54mm_Vertical | H1, H2, H3, H4, H5, H6, H7, H8 +4 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5, D6 |
| 3 | 47UF 47uF | CP_Radial_D6.3mm_P2.50mm | C1, C2, C3 |
| 2 | 1K | R_Default (DIN0207) | R1, R3 |
| 1 | 680R | R_Default (DIN0207) | R2 |
| 2 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 1 | 680R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Bus board design files
The KiCad project lives in the lennartquerter/euro-rack-synth repository on GitHub; these links point at the commit this page was built from.
Bus board: common questions
How big is the Bus board?
The Bus board measures 300 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bus board?
41 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bus board design files?
From the lennartquerter/euro-rack-synth repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bus board design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in euro-rack-synth
STM32
Cats eye
lennartquerter
90 × 110 mm223 parts4LCC-BY-NC-4.012- schematic only · 175 parts
Building blocks
lennartquerter
175 parts2LCC-BY-NC-4.012 Compressor
lennartquerter
60 × 110 mm174 parts4LCC-BY-NC-4.012STM32
Midi-2-cv
lennartquerter
50 × 110 mm142 parts4LCC-BY-NC-4.012Euro mate
lennartquerter
200 × 100 mm98 parts2LCC-BY-NC-4.012Noise board
lennartquerter
35 × 25 mm42 parts2LCC-BY-NC-4.012STM32
Synth Module
lennartquerter
30 × 110 mm34 parts2LCC-BY-NC-4.012Cable tester
lennartquerter
100 × 100 mm31 parts2LCC-BY-NC-4.012MSSOP
lennartquerter
19.2 × 14.2 mm4 parts2LCC-BY-NC-4.012
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687