DB20-G-APP
lernin2doit·DB20-G-APP·hardware/kicad/DB20G-Interface-v10.kicad_pcb
About the DB20-G-APP PCB
DB20-G-APP is an open source ESP32 PCB design by lernin2doit, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 67 mm, with 37 components from 26 distinct parts.
Its main chip is the C2688765, from the ESP32 family. Other key parts include the C6568. By type, the board carries 12 resistors, 9 capacitors, 4 connectors, 4 LEDs, 2 ICs and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
Custom wireless interface box that connects an Android phone to a Radioddity DB20-G GMRS mobile radio over Bluetooth, providing serial programming control, audio I/O, and PTT keying — no USB cable to the phone required.
Custom wireless interface box that connects an Android phone to a Radioddity DB20-G GMRS mobile radio over Bluetooth, providing serial programming control, audio I/O, and PTT keying — no USB cable to the phone required.
- Bluetooth Classic — phone connects wirelessly (SPP for serial, SCO for audio) - ESP32-WROOM-32E — single module replaces the USB hub + UART + audio codec - UART bridge — 9600 baud 8N1 for DB20-G programming protocol over BT SPP - DAC/ADC audio — ESP32 DAC output → radio MIC, radio SPK → ESP32 ADC - Transistor PTT driver — keys radio via GPIO, controlled from phone - DPDT…
Main components on the DB20-G-APP
DB20-G-APP bill of materials (BOM)
37 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2688765 ESP32-WROOM-32E | ESP32-WROOM-32E | U1 |
| 1 | C6568 AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | C118536 2N2222A | TO-92_Inline | Q1, Q2 |
| 1 | C386756 RADIO | RJ45_Amphenol_RJHSE5380 | J2 |
| 1 | C386756 HANDSET | RJ45_Amphenol_RJHSE5380 | J3 |
| 1 | EXT_PWR | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | UART_FLASH | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | C70069 500mA | Fuse_1812_4532Metric | F1 |
| 1 | C100024 G5V-2-DC5 | Relay_DPDT_Omron_G5V-2 | K1 |
| 1 | C2297 Green | LED_0805_2012Metric | LED1 |
| 1 | C84256 Red | LED_0805_2012Metric | LED2 |
| 1 | C2296 Yellow | LED_0805_2012Metric | LED3 |
| 1 | C72041 Blue | LED_0805_2012Metric | LED4 |
| 1 | C14516 1N4148 | D_SOD-323 | D1 |
| 1 | C2480 1N5819 | D_SOD-323 | D2 |
| 3 | 100NF 100nF | C_0805_2012Metric | C1, C3, C5 |
| 2 | 10UF 10uF | C_0805_2012Metric | C2, C4 |
| 1 | 10UF 22uF | C_0805_2012Metric | C6 |
| 1 | 10UF 100nF | C_0805_2012Metric | C7 |
| 1 | 22UF 100nF | C_0805_2012Metric | C8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 100nF | C_0805_2012Metric | C9 |
| 4 | 10K 10k | R_0805_2012Metric | R1, R2, R3, R5 |
| 2 | 4.7k | R_0805_2012Metric | R4, R6 |
| 4 | 330 220 | R_0805_2012Metric | R7, R8, R9, R10 |
| 1 | 4.7K 10k | R_0805_2012Metric | R11 |
| 1 | 1.5K 10k | R_0805_2012Metric | R12 |
DB20-G-APP design files
The KiCad project lives in the lernin2doit/DB20-G-APP repository on GitHub; these links point at the commit this page was built from.
DB20-G-APP: common questions
What microcontroller does the DB20-G-APP use?
The DB20-G-APP is built around the C2688765, from the ESP32 family.
How big is the DB20-G-APP PCB?
The DB20-G-APP measures 40 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DB20-G-APP?
37 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DB20-G-APP design files?
From the lernin2doit/DB20-G-APP repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the DB20-G-APP design in my own project?
Yes, under the terms of its MIT license, which lernin2doit chose for the repository.
Can I test firmware for the DB20-G-APP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k