5 open source boards using the C6568
Real designs built with the C6568, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Main board
felixzero
84.5 × 54.6 mm75 parts2LGPL-3.07ESP32
Sonar
QuickRecon
74.9 × 47 mm74 parts2LMIT2Adapter RCB F9T
carstenandrich
32 × 83 mm48 parts4LCERN-OHL-P-2.02AVR/Arduino
Arduino dolly
hollop90
26.8 × 53 mm37 parts4LNo license0ESP32
DB20-G-APP
lernin2doit
40 × 67 mm37 parts2LMIT0
How designs wire the C6568
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C6568 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
- The VREGIN pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
- The DCD pin is left unconnected on 4 of 5 designs.
- The RI/CLK pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DCDpin 1 | Connected to: Not connected 80% · GND 20% | — |
| RI/CLKpin 2 | Connected to: Not connected 80% · 3.3V 20% | — |
| GNDpin 3, 29 | Connected to: GND 89% | — |
| VDDpin 6 | Connected to: 3.3V 75% · a signal 25% |
|
| VREGINpin 7 | Connected to: 3.3V 100% |
|
| VBUSpin 8 | Connected to: VBUS 75% · a signal 25% |
|
| RSTpin 9 | Connected to: Signal 75% · not connected 25% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SUSPENDpin 11, 12 | Connected to: Not connected 88% | — |
| CHRENpin 13 | Connected to: Not connected 100% | — |
| CHR1pin 14 | Connected to: Not connected 100% | — |
| CHR0pin 15 | Connected to: Not connected 100% | — |
| WAKEUP/GPIO.3pin 16 | Connected to: Not connected 100% | — |
| RS485/GPIO.2pin 17 | Connected to: Not connected 100% | — |
| RXT/GPIO.1pin 18 | Connected to: Not connected 100% | — |
| TXT/GPIO.0pin 19 | Connected to: Not connected 100% | — |
| GPIO.6pin 20 | Connected to: Not connected 100% | — |
| GPIO.5pin 21 | Connected to: Not connected 100% | — |
| GPIO.4pin 22 | Connected to: Not connected 100% | — |
| CTSpin 23 | Connected to: Not connected 100% | — |
| RTSpin 24 | Connected to: Not connected 50% · a signal 50% |
|
| DSRpin 27 | Connected to: Not connected 100% | — |
| DTRpin 28 | Connected to: Signal 75% · not connected 25% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by felixzero, Adapter RCB F9T by carstenandrich, Sonar by QuickRecon and Arduino dolly by hollop90.
The C6568 in open source designs
The gallery holds 5 open source boards using the C6568 from 5 GitHub repositories; a typical one measures about 40 × 54.6 mm and carries around 48 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Main board by felixzero.
Microcontrollers on boards using the C6568
What boards using the C6568 are built for
C6568: common questions
Where can I find a C6568 reference design?
Each of the 5 boards on this page is a real design using the C6568. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C6568 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the C6568.
What decoupling capacitors do designs use on the C6568 VREGIN pin?
The VREGIN pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the C6568.
How is the C6568 DCD pin connected?
The DCD pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the C6568.
Which microcontrollers do boards using the C6568 use?
Most are built on ESP32 (3) and AVR/Arduino (1).
How big is a typical board using the C6568?
The median is 40 × 54.6 mm, and 60% are two-layer designs.
What is the most popular open source board using the C6568?
By GitHub stars, Main board by felixzero, with 7 stars.
Can I simulate one of these boards using the C6568 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.