Psu
About the Psu PCB
Psu is an open source PCB design by lhondareyte, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board, with 6 components from 6 distinct parts.
By type, the board carries 2 capacitors, 1 connector, 1 fuse and 1 diode.
From the project
Generic Schematic KiCad Templates
Psu bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Screw_Terminal_01x02 | J1 | |
| 1 | Fuse_Small | F1 | |
| 1 | TRANSF1 | TR1 | |
| 1 | W01G | Diode_Bridge_Round_D9.8mm | D1 |
| 1 | 1500u | C1 | |
| 1 | 220n | C2 |
Psu design files
The KiCad project lives in the lhondareyte/KiCad-Templates repository on GitHub; these links point at the commit this page was built from.
- LayoutPSUs/PSU-mono/psu.kicad_pcb
- SchematicPSUs/PSU-mono/psu.kicad_sch
Psu: common questions
How big is the Psu PCB?
The Psu has 2 copper layers and is 1.6 mm thick.
How many components are on the Psu?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psu design files?
From the lhondareyte/KiCad-Templates repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Psu design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which lhondareyte chose for the repository.
More boards in KiCad-Templates
- schematic only · 35 partsSTM32
Blue pill
35 parts2LCC-BY-4.01 - schematic only · 7 parts
Micro sd card
7 parts2LCC-BY-4.01 - schematic only · 6 partsAVR/Arduino
Atmega32u4
6 parts2LCC-BY-4.01 - schematic only · 6 partsAVR/Arduino
Arduino nano
6 parts2LCC-BY-4.01 - schematic only · 5 partsAVR/Arduino
Attiny2313
5 parts2LCC-BY-4.01 
Discovery-F4 base board
53.3 × 30.5 mm4 parts2LCC-BY-4.01- schematic only · 4 partsAVR/Arduino
Atmega8
4 parts2LCC-BY-4.01