HardLabs

Attiny2313

lhondareyte·KiCad-Templates·AVR/attiny2313/attiny2313.kicad_pcb

This repository ships a schematic but no board layout.

About the Attiny2313 PCB

Attiny2313 is an open source AVR/Arduino PCB design by lhondareyte, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board, with 5 components from 5 distinct parts.

Its main chip is the ATtiny2313-20P, from the AVR/Arduino family. By type, the board carries 2 capacitors, 2 resistors and 1 IC.

From the project

Generic Schematic KiCad Templates

Main components on the Attiny2313

ATtiny2313-20P

Attiny2313 bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
ATtiny2313-20P
U1
1
100n
C1
1
10u
C2
1
4k7
R1
1
1M
R2

Attiny2313 design files

The KiCad project lives in the lhondareyte/KiCad-Templates repository on GitHub; these links point at the commit this page was built from.

Attiny2313: common questions

What microcontroller does the Attiny2313 use?

The Attiny2313 is built around the ATtiny2313-20P, from the AVR/Arduino family.

How big is the Attiny2313 PCB?

The Attiny2313 has 2 copper layers and is 1.6 mm thick.

How many components are on the Attiny2313?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Attiny2313 design files?

From the lhondareyte/KiCad-Templates repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Attiny2313 design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which lhondareyte chose for the repository.

Can I test firmware for the Attiny2313 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KiCad-Templates

Similar boards