Micro sd card
About the Micro sd card PCB
Micro sd card is an open source PCB design by lhondareyte, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board, with 7 components from 4 distinct parts.
Other key parts include the 74LVC125. By type, the board carries 4 resistors, 2 connectors and 1 IC.
From the project
Generic Schematic KiCad Templates
Main components on the Micro sd card
Micro sd card bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC125 | U1 | |
| 1 | Micro_SD_Card_Det2 | J1 | |
| 1 | Conn_01x06 | J2 | |
| 4 | 3k3 | R1, R2, R3, R4 |
Micro sd card design files
The KiCad project lives in the lhondareyte/KiCad-Templates repository on GitHub; these links point at the commit this page was built from.
Micro sd card: common questions
How big is the Micro sd card PCB?
The Micro sd card has 2 copper layers and is 1.6 mm thick.
How many components are on the Micro sd card?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Micro sd card design files?
From the lhondareyte/KiCad-Templates repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Micro sd card design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which lhondareyte chose for the repository.
More boards in KiCad-Templates
- schematic only · 35 partsSTM32
Blue pill
35 parts2LCC-BY-4.01 - schematic only · 6 partsAVR/Arduino
Atmega32u4
6 parts2LCC-BY-4.01 - schematic only · 6 parts
Psu
6 parts2LCC-BY-4.01 - schematic only · 6 partsAVR/Arduino
Arduino nano
6 parts2LCC-BY-4.01 - schematic only · 5 partsAVR/Arduino
Attiny2313
5 parts2LCC-BY-4.01 - schematic only · 4 partsAVR/Arduino
Atmega8
4 parts2LCC-BY-4.01 
Discovery-F4 base board
53.3 × 30.5 mm4 parts2LCC-BY-4.01