LightRail Eval Board

lightrail-dev·new·fab/eval_board/kicad/LightRail_Eval_Board.kicad_pcb

LightRail Eval Board layout, top view — open source FPGA board by lightrail-dev
Simulate this board

About the LightRail Eval Board

LightRail Eval Board is an open source FPGA PCB design by lightrail-dev, published on GitHub. It is a 22-layer board measuring 100 × 100 mm, with 187 components from 53 distinct parts.

Its main chip is the XC7A100T-1FTG256C, from the FPGA family. Other key parts include the LR-NCE-MPW-001, LR-TFLN-PIC-001, ADP7118AUJZ-0.9-R7, TPS7A2018DBVR and TPS7A2010DBVR. By type, the board carries 92 capacitors, 42 resistors, 16 test points, 15 ICs, 10 connectors and 6 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Project: LightRail AI Compute Node (Dual-CPO, NCE + HBM4 co-packaged, 1.6 Tbps photonic I/O) Model: LR-P3A Revision: 6.3 (32-layer HDI, IPC-6012 Class 3, 1000 A PDN — fully routed) Date: 2026-05-18 Company: LightRail AI

Project: LightRail AI Compute Node (Dual-CPO, NCE + HBM4 co-packaged, 1.6 Tbps photonic I/O) Model: LR-P3A Revision: 6.3 (32-layer HDI, IPC-6012 Class 3, 1000 A PDN — fully routed) Date: 2026-05-18 Company: LightRail AI

See docs/Architecture.md for the block diagram and signal-flow description.

See docs/Stackup.md for the impedance target for each net class against the assumed dielectric stackup.

Main components on the LightRail Eval Board

LightRail Eval Board bill of materials (BOM)

187 components, 53 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LR-NCE-MPW-001
NCE_TEST_CHIP
U1
1
XC7A100T-1FTG256C
XC7A100T
U2
1
LR-TFLN-PIC-001
TFLN_PIC
U3
1
ADP7118AUJZ-0.9-R7
ADP7118-0.9V
U10
2
TPS7A2018DBVR
TPS7A20-1.8V
U11, U14
1
TPS7A2010DBVR
TPS7A20-1.0V
U12
1
TPS7A3301DBVR
TPS7A33-3.3V
U13
1
TPS54360DDAR
TPS54360
U15
1
Si5395A-A-GM
Si5395A
U20
1
AD7928BRUZ
AD7928
U21
1
FT232HQ
FT232H
U22
1
W25Q128JVSIQ
W25Q128JVS
U23
1
AD5684RBRUZ
AD5684R
U24
1
TMP461AIDR
TMP461
U25
1
SiT5356AI-33-25E-100.000000
100MHz_TCXO
Y1
1
PJ-002AH
Barrel_Jack
J1
1
USB4110-GF-A
USB-C
J2
1
—
2-pin_Power
J3
1
—
JTAG_2x5
J5
1
—
GPIO_2x7
J6
Show 33 more
QtyPartRefs
1
142-0701-851
SMA_RF1
J7
1
142-0701-851
SMA_RF2
J8
1
142-0701-851
SMA_RF3
J9
1
142-0701-851
SMA_RF4
J10
1
—
MPO_Fiber
J11
1
0805L200SLYR
Fuse_2A
F1
1
B3F-1000
Reset
SW1
16
—
Test_Point
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +8
1
150060GS75000
LED_Green
D1
1
150060BS75000
LED_Blue
D2
1
150060RS75000
LED_Red
D3
1
150060YS75000
LED_Yellow
D4
2
PRTR5V0U2X
ESD_Diode
D5, D5_2
1
744043004R7
4.7uH
L1
2
BLM18PG121SN1D
Ferrite_Bead
L2, L3
2
GRM21BR61E226ME44L
22uF
C1, C1_2
4
GRM188R61E106MA73D
10uF
C2, C2_2, C2_3, C2_4
8
GRM155R60J475ME47D
4.7uF
C3, C3_2, C3_3, C3_4, C3_5, C3_6, C3_7, C3_8
12
GRM155R61E105KA12D
1uF
C4, C4_2, C4_3, C4_4, C4_5, C4_6, C4_7, C4_8 +4
24
GRM155R71E104KA88D
100nF
C5, C5_2, C5_3, C5_4, C5_5, C5_6, C5_7, C5_8 +16
8
GRM155R71H103KA12D
10nF
C6, C6_2, C6_3, C6_4, C6_5, C6_6, C6_7, C6_8
4
GRM1555C1H102JA01D
1nF
C7, C7_2, C7_3, C7_4
8
GRM1555C1H101JA01D
100pF
C8, C8_2, C8_3, C8_4, C8_5, C8_6, C8_7, C8_8
4
GRM1555C1H220JA01D
22pF
C9, C9_2, C9_3, C9_4
16
GRM033R71A104KA01D
100nF_AC
C10, C10_2, C10_3, C10_4, C10_5, C10_6, C10_7, C10_8 +8
2
T520D107M016ATE070
100uF_Tant
C11, C11_2
12
RC0402FR-0710KL
10k
R1, R1_2, R1_3, R1_4, R1_5, R1_6, R1_7, R1_8 +4
6
RC0402FR-074K7L
4.7k
R2, R2_2, R2_3, R2_4, R2_5, R2_6
8
RC0402FR-07100RL
100
R3, R3_2, R3_3, R3_4, R3_5, R3_6, R3_7, R3_8
4
RC0402FR-0749R9L
49.9
R4, R4_2, R4_3, R4_4
4
RC0402FR-07330RL
330
R5, R5_2, R5_3, R5_4
4
RC0402JR-070RL
0
R6, R6_2, R6_3, R6_4
4
RC0402FR-071KL
1k
R7, R7_2, R7_3, R7_4

LightRail Eval Board design files

The KiCad project lives in the lightrail-dev/new repository on GitHub; these links point at the commit this page was built from.

LightRail Eval Board: common questions

What microcontroller does the LightRail Eval Board use?

The LightRail Eval Board is built around the XC7A100T-1FTG256C, from the FPGA family.

How big is the LightRail Eval Board?

The LightRail Eval Board measures 100 × 100 mm, has 22 copper layers and is 2.4 mm thick.

How many components are on the LightRail Eval Board?

187 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LightRail Eval Board design files?

From the lightrail-dev/new repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LightRail Eval Board design in my own project?

The repository has no license, so all rights stay with lightrail-dev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LightRail Eval Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in new

Similar boards