Ice4pi gpib
lightside-instruments·ice4pi-gpib
About the Ice4pi gpib PCB
Ice4pi gpib is an open source FPGA PCB design by lightside-instruments, published on GitHub under the TAPR-OHL-1.0 license. It is a 4-layer board measuring 85 × 56 mm, with 94 components from 26 distinct parts.
Its main chip is the ICE40HX1K-TQ144, from the FPGA family. Other key parts include the W25Q32JVSNIQ, MIC5504-1.2YM5, DSC1001DI1-012.0000, SN75160BN and SN75161BN. By type, the board carries 46 resistors, 31 capacitors, 8 diodes, 6 ICs and 3 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
ice4pi-gpib is an open hardware platform for FPGA development published by Lightside Instruments AS.
ice4pi-gpib is an open hardware platform for FPGA development published by Lightside Instruments AS.
The initial release ice4pi-gpib includes schematic and PCB design files for KiCAD. The board is based on ice4pi-2.4 extended with gpib4pi GPIB I/O and allows for development of GPIB bus logic analyzers and more deterministic logic then a software only bitbang implementation is possible with the bitbang driver available for gpib4pi.
Main components on the Ice4pi gpib
Ice4pi gpib bill of materials (BOM)
94 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40HX1K-TQ144 | TQFP-144_20x20mm_P0.5mm | U1 |
| 1 | W25Q32JVSNIQ W25Q32JVSSIQ | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MIC5504-1.2YM5 | SOT-23-5 | U3 |
| 1 | DSC1001DI1-012.0000 | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U4 |
| 1 | SN75160BN | DIP-20_W7.62mm | U6 |
| 1 | SN75161BN | DIP-20_W7.62mm | U7 |
| 1 | SSW-106-01-T-D Pmod 2x6 | PinSocket_2x06_P2.54mm_Vertical_1to6_7to12 | J1 |
| 1 | SSQ-120-03-T-D raspberry_pi_2_3_4_ordered | PinSocket_2x20_P2.54mm_Vertical_1_04mm | J2 |
| 1 | 112-024-113R001 Conn_02x12_Top_Bottom | centronix-24-male | J3 |
| 4 | SML-LX0603GW-TR LED | LED_0402_1005Metric | D1, D2, D3, D4 |
| 1 | SML-LX0603IW-TR LED | LED_0402_1005Metric | D5 |
| 1 | CDBU0520 | D_0603_1608Metric | D6 |
| 1 | 150060VS55040 LED | LED_0603_1608Metric | D7 |
| 1 | 150060RS55040 LED | LED_0603_1608Metric | D8 |
| 5 | ZRB15XR61A106ME01D 10uF | C_0402_1005Metric | C1, C4, C16, C20, C30 |
| 13 | 885012205037 0.1uF | C_0402_1005Metric | C2, C3, C9, C12, C14, C18, C19, C21 +5 |
| 7 | 885012205012 0.01uF | C_0402_1005Metric | C6, C10, C11, C13, C15, C27, C29 |
| 1 | ZRB15XR61A106ME01D 10 uF | C_0402_1005Metric | C7 |
| 1 | C1005X5R0J475M050BC 4.7uF | C_0402_1005Metric | C8 |
| 2 | 885012105012 1 uF | C_0402_1005Metric | C17, C22 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | GRM155C8YA224KE01J 220 nF | C_0402_1005Metric | C33, C34 |
| 6 | ERJ-2GEJ103X 10K | R_0402_1005Metric | R2, R15, R16, R17, R18, R19 |
| 7 | ERJ-2GEJ102X 1K | R_0402_1005Metric | R3, R4, R10, R11, R12, R13, R14 |
| 1 | ERJ-2GEJ101X 100 | R_0402_1005Metric | R20 |
| 16 | RC0402JR-073K3L 3.3K | R_0402_1005Metric | R111, R112, R113, R114, R115, R116, R117, R118 +8 |
| 16 | RC0402FR-076K2L 6.2K | R_0402_1005Metric | R121, R122, R123, R124, R125, R126, R127, R128 +8 |
Ice4pi gpib design files
The KiCad project lives in the lightside-instruments/ice4pi-gpib repository on GitHub; these links point at the commit this page was built from.
- Layoutice4pi.kicad_pcb
- Schematicice4pi.kicad_sch
- BOMbom.csv
Ice4pi gpib: common questions
What microcontroller does the Ice4pi gpib use?
The Ice4pi gpib is built around the ICE40HX1K-TQ144, from the FPGA family.
How big is the Ice4pi gpib PCB?
The Ice4pi gpib measures 85 × 56 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ice4pi gpib?
94 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ice4pi gpib design files?
From the lightside-instruments/ice4pi-gpib repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ice4pi gpib design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which lightside-instruments chose for the repository.
Can I test firmware for the Ice4pi gpib without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765