Yec60-

limiez1011·yec60-·KiCAD/60% keeb.kicad_pcb

About the Yec60- PCB

Yec60- is an open source RP2040/RP2350 PCB design by limiez1011, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 312 × 98 mm, with 153 components from 19 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the RT9013-33GB and W25Q128JVSIQ. By type, the board carries 62 switches, 61 diodes, 18 capacitors, 7 resistors, 3 ICs and 1 crystal.

It belongs with the keyboards designs in this gallery.

From the project

60% rp2040 based keyboard that runs QMK fw

Main components on the Yec60-

RP2040 RT9013-33GB W25Q128JVSIQ

Yec60- bill of materials (BOM)

153 components, 19 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	RT9013-33GB	SOT-23-5_HandSoldering	U2
1	W25Q128JVSIQ	Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm	U3
1	X322512MSB4SI YXC(扬兴晶振)	CRYSTAL-SMD_4P-L3.2-W2.5-BL	X1
1	USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J1
1	SW_Push	C_0402_1005Metric_Pad0.74x0.62mm_HandSolder	SW1
56	~	MXOnly-1U-Hotswap	SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +48
3	~	MXOnly-2U-Hotswap-ReversedStabilizers	SW15, SW42, SW43
1	~	MXOnly-2.75U-Hotswap-ReversedStabilizers	SW54
1	~	MXOnly-6.25U-Hotswap-ReversedStabilizers	SW58
61	~	D_SOD-123	D1, D2, D3, D4, D5, D6, D7, D8 +53
2	1uF	C_0603_1608Metric	C1, C2
2	1uF	C_0402_1005Metric	C3, C12
12	100nF	C_0402_1005Metric	C4, C5, C6, C7, C8, C9, C10, C11 +4
2	33pF	C_0402_1005Metric	C15, C16
2	27	R_0402_1005Metric	R1, R2
2	5.1K	R_0402_1005Metric	R3, R4
2	10K	R_0402_1005Metric	R5, R7
1	1K	R_0402_1005Metric	R6

Yec60- design files

The KiCad project lives in the limiez1011/yec60- repository on GitHub; these links point at the commit this page was built from.

Yec60-: common questions

What microcontroller does the Yec60- use?

The Yec60- is built around the RP2040, from the RP2040/RP2350 family.

How big is the Yec60- PCB?

The Yec60- measures 312 × 98 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yec60-?

153 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Yec60- design files?

From the limiez1011/yec60- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Yec60- design in my own project?

Yes, under the terms of its GPL-3.0 license, which limiez1011 chose for the repository.

Can I test firmware for the Yec60- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.