Cloud keyboard

linalg137·cloud-keyboard·pcb/keyboard.kicad_pcb

Cloud keyboard PCB layout, top view — open source ESP32 board by linalg137

About the Cloud keyboard PCB

Cloud keyboard is an open source ESP32 PCB design by linalg137, published on GitHub. It is a 2-layer board measuring 92 × 80 mm, with 20 components from 4 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 9 switches, 9 diodes, 1 IC and 1 battery holder.

It belongs with the keyboards designs in this gallery.

From the project

A cloud shaped keyboard.

The cloud keyboard is a simple cloud-shaped 3x3 keyboard designed using KiCAD and Onshape. It connects with a USB, and runs a simple micropython code that prints a designated number on the coding shell for each key when pressed.

getting the pcb 1. go to https://jlcpcb.com/. click "get instant quote". 2. download the gerber zip file from the pcb folder and upload it. 3. you can change the color of the PCB if you'd like, but keep all the other settings the same. 4. order your PCB by following the steps on the website.

Cloud keyboard, from the project README
From the project README

Main components on the Cloud keyboard

Cloud keyboard bill of materials (BOM)

20 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
Battery_Cell
BT1
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
9
1N914
D1, D2, D3, D4, D5, D6, D7, D8 +1

Cloud keyboard design files

The KiCad project lives in the linalg137/cloud-keyboard repository on GitHub; these links point at the commit this page was built from.

Cloud keyboard: common questions

What microcontroller does the Cloud keyboard use?

The Cloud keyboard is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Cloud keyboard PCB?

The Cloud keyboard measures 92 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cloud keyboard?

20 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cloud keyboard design files?

From the linalg137/cloud-keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cloud keyboard design in my own project?

The repository has no license, so all rights stay with linalg137. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cloud keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards