Plink
Logan-Fouts·Plink·hardware/plink_kicad/plink_kicad.kicad_pcb
About the Plink PCB
Plink is an open source RP2040/RP2350 PCB design by Logan-Fouts, published on GitHub. It is a 2-layer board measuring 220 × 70 mm, with 37 components from 6 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the CD74HC4067SM96. By type, the board carries 16 LEDs, 2 ICs, 2 switches and 1 module.
It belongs with the displays & leds, audio and sensors designs in this gallery.
From the project
Open-source velocity-sensitive USB MIDI keyboard built on the Raspberry Pi Pico (RP2040), with Hall-effect magnetic key switches, per-key NeoPixel LEDs, C firmware and a KiCad PCB.
A low-cost, velocity-sensitive USB MIDI keyboard built on the Raspberry Pi Pico, using Hall-effect key switches.
Plink reads 16 magnetic (Hall-effect) key switches through an analog multiplexer, works out how fast each key was pressed, and sends MIDI notes with velocity over USB. Each key has its own NeoPixel LED, and two front-panel buttons transpose the keyboard up or down.
Main components on the Plink
Plink bill of materials (BOM)
37 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Rotationsenkoder 1530 pv med tryckknapp | U1 |
| 1 | CD74HC4067SM96 | DB0024A_M | U2 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_SMD_HandSolder | A1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 16 | SW_Cherry_MX_1.00u_PCB_HALL_EFFECT | SW_Cherry_MX_HE_1.00u | SW_HE1, SW_HE2, SW_HE3, SW_HE4, SW_HE5, SW_HE6, SW_HE7, SW_HE8 +8 |
| 16 | ~ | SMD Neopixel 5050 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +8 |
Plink design files
The KiCad project lives in the Logan-Fouts/Plink repository on GitHub; these links point at the commit this page was built from.
Plink: common questions
What microcontroller does the Plink use?
The Plink is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Plink PCB?
The Plink measures 220 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plink?
37 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plink design files?
From the Logan-Fouts/Plink repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Plink design in my own project?
The repository has no license, so all rights stay with Logan-Fouts. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Plink without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k