USBSID-Pico
LouDnl·USBSID-Pico·hardware/USBSID-Pico-v1.3/USBSID-Pico-v1.3f.kicad_pcb
About the USBSID-Pico PCB
USBSID-Pico is an open source PCB design by LouDnl, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 92.8 × 71.8 mm, with 83 components from 34 distinct parts.
Other key parts include the MT3608 and DG467. By type, the board carries 32 capacitors, 21 resistors, 14 connectors, 6 diodes, 4 ICs and 3 inductors.
It belongs with the retro computing and audio designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

Main components on the USBSID-Pico
USBSID-Pico bill of materials (BOM)
83 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MT3608 AeroSemi | SOT-23-6 | U2, U3, U4 |
| 1 | DG467 Vishay | SOT-23-6 | U5 |
| 2 | MMBT2222A onsemi | SOT-23 | Q1, Q2 |
| 1 | SID1 (DIP28-Wide-socket) CONNFLY Elec | DIP-28_W15.24mm_Socket_enlargedholes | J1 |
| 1 | SID2 (DIP28-Wide-socket) CONNFLY Elec | DIP-28_W15.24mm_Socket_enlargedholes | J2 |
| 1 | S1 6581/8580 J1 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | S2 6581/8580 J1 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | GND/S1 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | S2/GND XUNPU | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | SJ1-3525N CuiDevices | 3.5MM_SWITCHCRAFT_35RAPC4BHN2 | J8 |
| 1 | S1 6581/8580 J2 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | S2 6581/8580 J2 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | A5 XUNPU | PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | UART XUNPU | PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | SID1 12v/9v XUNPU | PinHeader_1x02_P2.54mm_Vertical | J20 |
| 1 | SID2 12v/9v XUNPU | PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | OPT XUNPU | PinHeader_1x04_P2.54mm_Vertical | J24 |
| 1 | RST Omron Electronics | SW_SPST_B3U-1000P_larger_pads | SW1 |
| 6 | MBR120 onsemi | SOD-123FL_diode | D1, D2, D3, D4, D5, D6 |
| 3 | 4,7uH 1000mA SunLord | L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1, L2, L3 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10UF 10uF KEMET | CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C1 |
| 6 | 470PF 470pF Guangdong Fenghua Advanced Tech | C_0805_2012Metric | C2, C4, C6, C8, C12, C13 |
| 4 | 22NF 22nF Samsung | C_0805_2012Metric | C3, C5, C7, C9 |
| 2 | 1000PF 1000pF Samsung | C_0805_2012Metric | C10, C11 |
| 8 | 100NF 100nF Samsung | C_0805_2012Metric | C14, C15, C27, C28, C29, C30, C31, C32 |
| 2 | 10UF 10uF Honor Elec | CP_Elec_4x5.3 | C16, C17 |
| 9 | 22UF 22uF Samsung | C_0805_2012Metric | C18, C19, C20, C21, C22, C23, C24, C25 +1 |
| 3 | 10K 10k UNI-ROYAL | R_0805_2012Metric | R1, R2, R4 |
| 9 | 1k UNI-ROYAL | R_0805_2012Metric | R3, R5, R6, R7, R8, R9, R10, R16 +1 |
| 1 | 7,5k UNI-ROYAL | R_0805_2012Metric | R11 |
| 2 | 18K 18k UNI-ROYAL | R_0805_2012Metric | R12, R14 |
| 2 | 47K 47k UNI-ROYAL | R_0805_2012Metric | R13, R15 |
| 2 | 330K 330k UNI-ROYAL | R_0805_2012Metric | R18, R19 |
| 2 | 100K 100k UNI-ROYAL | R_0805_2012Metric | R20, R21 |
USBSID-Pico design files
The KiCad project lives in the LouDnl/USBSID-Pico repository on GitHub; these links point at the commit this page was built from.
USBSID-Pico: common questions
How big is the USBSID-Pico PCB?
The USBSID-Pico measures 92.8 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USBSID-Pico?
83 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USBSID-Pico design files?
From the LouDnl/USBSID-Pico repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USBSID-Pico design in my own project?
Yes, under the terms of its GPL-2.0 license, which LouDnl chose for the repository.
More boards in USBSID-Pico
Earlier revisions in the repo: USBSID-Pico-v1.0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kExpansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0k