HardLabs

ESP32-S3-WROOM-1-BreakBoard

louisbabeschneider·Balancing-Babebot·Hardware/PCB/ESP32-S3-WROOM-1-BreakBoard/ESP32-S3-WROOM-1-BreakBoard.kicad_pcb

ESP32-S3-WROOM-1-BreakBoard PCB layout, top view — open source ESP32 board by louisbabeschneider

About the ESP32-S3-WROOM-1-BreakBoard PCB

ESP32-S3-WROOM-1-BreakBoard is an open source ESP32 PCB design by louisbabeschneider, published on GitHub. It is a 2-layer board measuring 31.3 × 52.3 mm, with 3 components from 2 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. By type, the board carries 2 connectors and 1 IC.

From the project

sudo apt-get install git wget flex bison gperf python3 python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0

Main components on the ESP32-S3-WROOM-1-BreakBoard

ESP32-S3-WROOM-1-N8

ESP32-S3-WROOM-1-BreakBoard bill of materials (BOM)

3 components, 2 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8
IC1
2
PinHeader-p20-2.54mm_1
J1, J2

ESP32-S3-WROOM-1-BreakBoard design files

The KiCad project lives in the louisbabeschneider/Balancing-Babebot repository on GitHub; these links point at the commit this page was built from.

ESP32-S3-WROOM-1-BreakBoard: common questions

What microcontroller does the ESP32-S3-WROOM-1-BreakBoard use?

The ESP32-S3-WROOM-1-BreakBoard is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the ESP32-S3-WROOM-1-BreakBoard PCB?

The ESP32-S3-WROOM-1-BreakBoard measures 31.3 × 52.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-S3-WROOM-1-BreakBoard?

3 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-S3-WROOM-1-BreakBoard design files?

From the louisbabeschneider/Balancing-Babebot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-S3-WROOM-1-BreakBoard design in my own project?

The repository has no license, so all rights stay with louisbabeschneider. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-S3-WROOM-1-BreakBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Balancing-Babebot

Similar boards