DualPressure RS485
LSDRM·DualPressure-Thermocouple_forVMCGUI·Electronic Boards/DualPressure-Thermocouple_RS485/DualPressure_RS485.kicad_pcb
About the DualPressure RS485 PCB
DualPressure RS485 is an open source PCB design by LSDRM, published on GitHub. It is a 2-layer board measuring 123.3 × 24.8 mm, with 35 components from 24 distinct parts.
Other key parts include the MAX14840EATA+, ADS122U04IPW and AM-K-PCB. By type, the board carries 11 resistors, 9 capacitors, 3 ICs, 3 connectors, 2 diodes and 1 inductor.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
A customized DAQ board through UART protocol, embeding two pressure sensors and one thermocouple. Has been developed to be used with VMCGUI.
Main components on the DualPressure RS485
DualPressure RS485 bill of materials (BOM)
35 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX14840EATA+ | SON65P300X300X80-9N | IC0 |
| 1 | ADS122U04IPW | SOP65P640X120-16N | IC1 |
| 1 | AM-K-PCB | AMKPCB | U0 |
| 1 | STX-3000 | STX3000 | J0 |
| 1 | USB2066-05-RBHM-15-STB-00-00-A | USB206605RBHM15STB0000A | J1 |
| 1 | 2-1445057-3 | 214450573 | J2 |
| 2 | ABP2D | ABP2D | ABP2D0, ABP2D1 |
| 2 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FC0, FC1 |
| 1 | LM2576D2TR4-5G | D2TSUFFIX-CASE936A-02-ISSUEC | REG0 |
| 1 | AP7333-33SAG-7 | SOT96P240X135-3N | REG1 |
| 1 | SBRT3U60SAF-13 | SODFL5226X110N | D0 |
| 1 | SK34A | DIOM5126X230N | D1 |
| 1 | 100u | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L0 |
| 1 | 100u | CP_Elec_8x10.5 | C0 |
| 1 | 1000u | CP_Elec_10x10.5 | C1 |
| 1 | 1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | FREECHOICE | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 2 | FC | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 2 | 10n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C6, C7 |
| 1 | 10u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R0, R10 |
| 5 | 47 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | 1M | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7 |
| 2 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R9 |
DualPressure RS485 design files
The KiCad project lives in the LSDRM/DualPressure-Thermocouple_forVMCGUI repository on GitHub; these links point at the commit this page was built from.
DualPressure RS485: common questions
How big is the DualPressure RS485 PCB?
The DualPressure RS485 measures 123.3 × 24.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DualPressure RS485?
35 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the DualPressure RS485 design files?
From the LSDRM/DualPressure-Thermocouple_forVMCGUI repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DualPressure RS485 design in my own project?
The repository has no license, so all rights stay with LSDRM. Use it as a reference, and ask the author before reusing the design.
More boards in DualPressure-Thermocouple_forVMCGUI
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956