40 open source boards using the LMV321
Real designs built with the LMV321, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
BusPirate-5-rev10
DangerousPrototypes
60.5 × 60 mm210 parts4LMIT124ESP32
Sony scopeman
lucysrausch
53.5 × 101.8 mm135 parts2LNo license69FPGA
Fmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066AVR/Arduino
SH-RPi hardware
hatlabs
65 × 56.5 mm153 parts4LCC-BY-4.056HSLinkPro
cherry-embedded
44 × 44 mm144 parts4LApache-2.044ESP32
Monolith
luftaquila
96 × 74.4 mm112 parts2LCustom license43STM32
Cantaloupe
Kaleidogeist
143.9 × 118.7 mm121 parts2LCERN-OHL-S-2.032STM32
JBclone soldering station
Minu-IU3IRR
65 × 100 mm52 parts2LNo license13STM32
Panel board
ReflexCreations
281 × 195 mm305 parts4LMIT12EX-MotorShield8874
DCC-EX
65.9 × 52.9 mm75 parts4LCERN-OHL-W-2.012RP2040/RP2350
Hardware IO 16 8 1
PPUC
100 × 100 mm217 parts2LTAPR-OHL-1.05Motor shield
semify-eda
65.9 × 52.9 mm80 parts4LNo license5ESC-module
Prosjekt-gruppe
32.3 × 47.3 mm68 parts4LMIT5RISC-V
MC-10 Tape Emulator
SteveLRojas
102.1 × 73.8 mm95 parts4LNo license2IrrigationPiHat
Cameron-Ray
65.2 × 30.1 mm85 parts6LMIT2ESP32
BECom
rjsc
63.6 × 86 mm235 parts4LGPL-3.01STM32
Minicurrent
jemos
70 × 60 mm24 parts2LNo license1EVD80 MCU
Alexandr-Filatov
236 × 150 mm746 parts6LNo license0STM32
Sss opr3-v1 (1)
Space-and-Satellite-Systems-UC-Davis
90 × 90 mm267 parts4LNo license0RP2040/RP2350
REV10a
thestumbler
80 × 80 mm210 parts4LMIT0RP2040/RP2350
Hardware IO 16x8 matrix
PPUC
97.6 × 67.3 mm202 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Opto 16
PPUC
99.7 × 67.3 mm200 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Out 8x10
PPUC
97.6 × 67.3 mm162 parts2LTAPR-OHL-1.00Epanel energy monitor
mylife-home
103 × 86.5 mm143 parts2LGPL-3.00Mosfets
abd-alaj
222.5 × 104.5 mm121 parts4LNo license0STM32
Tempspike
JustinPead
46.5 × 88.5 mm45 parts2LNo license0Kicad pcb agent skills
yymqd
18 × 18 mm16 parts2LMIT0FPGA
Fmcw nightly
matthuszagh
94.6 × 83.4 mm424 parts4LApache-2.066ESP32
Monolith mini
luftaquila
51.6 × 74.4 mm58 parts2LCustom license43AVR/Arduino
Swing
lucanastasio
50 × 50 mm146 parts4LNo license1ESP32
Prototype-3
mylife-home
100 × 100 mm68 parts2LGPL-3.00Jantteri secondary
OJ2016
90.6 × 20.3 mm58 parts2LNo license1RISC-V
DropInTapPT2399
kanengomibako
10.1 × 20.3 mm25 parts4LUnlicense4(PCB BAD)sss pv-2u v4 (1) (1)
Space-and-Satellite-Systems-UC-Davis
84.5 × 204.5 mm48 parts2LNo license0Realop1 burnwire top2
Space-and-Satellite-Systems-UC-Davis
98 × 98 mm27 parts2LNo license0IN-ANA
Thierry-oshw
5 × 34 mm8 parts2LCERN-OHL-P-2.00
How designs wire the LMV321
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the LMV321 connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin is tied to GND on 32 of 32 designs.
- The V+ pin has a decoupling capacitor on 24 of 32 designs, most often 100 nF (then 10 µF).
- The - pin has a series resistor on 23 of 32 designs, most often 10 kΩ (then 1 kΩ).
- Pin 4 has a series resistor on 22 of 32 designs, most often 10 kΩ (then 5 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| +pin 1 | Connected to: Signal 81% |
|
| V-pin 2 | Connected to: GND 100% | — |
| -pin 3 | Connected to: Signal 91% |
|
| Pin 4 | Connected to: Signal 97% |
|
| V+pin 5 | Connected to: 3.3V 84% · a signal 16% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BusPirate-5-rev10 by DangerousPrototypes, THTIC by MetalMusings, Sony scopeman by lucysrausch and Fmcw by matthuszagh.
The LMV321 in open source designs
The gallery holds 40 open source boards using the LMV321 from 32 GitHub repositories; a typical one measures about 75 × 74.1 mm and carries around 104 components.
55% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is BusPirate-5-rev10 by DangerousPrototypes.
Parts used alongside the LMV321
Microcontrollers on boards using the LMV321
What boards using the LMV321 are built for
LMV321: common questions
Where can I find a LMV321 reference design?
Each of the 40 boards on this page is a real design using the LMV321. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LMV321 V- pin connected?
The V- pin is tied to GND on 32 of 32 designs. Counted from the KiCad layouts of 32 open source designs using the LMV321.
What decoupling capacitors do designs use on the LMV321 V+ pin?
The V+ pin has a decoupling capacitor on 24 of 32 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the LMV321.
What resistor goes on the LMV321 - pin?
The - pin has a series resistor on 23 of 32 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 32 open source designs using the LMV321.
What parts are used alongside the LMV321?
The RP2040, W25Q128JVSIQ, ADM3483, AP2112K-3.3 and LMV324 appear in the most repositories here.
Which microcontrollers do boards using the LMV321 use?
Most are built on RP2040/RP2350 (6), STM32 (6), ESP32 (5) and AVR/Arduino (2).
How big is a typical board using the LMV321?
The median is 75 × 74.1 mm, and 55% are two-layer designs.
What is the most popular open source board using the LMV321?
By GitHub stars, BusPirate-5-rev10 by DangerousPrototypes, with 124 stars.
Can I simulate one of these boards using the LMV321 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.