25 open source boards using the 74LVC2G17
Real designs built with the 74LVC2G17, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Open MOtor DRiver Initiative (OMODRI)
open-dynamic-robot-initiative
50 × 50 mm253 parts8LBSD-3-Clause122RP2040/RP2350
Pixelvation
Pixelvation
36.8 × 27.9 mm28 parts2LNo license691fNoiseAmplifierRev13
curtisseizert
140 × 100 mm375 parts6LMIT35IEC-62056-21-Optical-Probe
twam
26.8 × 26.8 mm28 parts2LNo license33STM32
Trv
Polski-Zwiazek-Krotkofalowcow
100 × 100 mm231 parts2LCC-BY-NC-4.011STM32
Trv
sq5nry
100 × 100 mm231 parts2LCC-BY-NC-4.02STM32
16-in, 16-out USB <-> ADAT interface
swiszczoo
150 × 56 mm217 parts4LNo license2Ksoloti gills
ksoloti
150 × 92 mm206 parts2LCC-BY-4.02ESP32
Microbot v1.1
Freimor
185 × 58.6 mm190 parts4LNo license0RP2040/RP2350
Rp2040 robotronix v 1.1
bm6t
130 × 75 mm185 parts4LNo license0TCAR Motor Board - L298P
tronixio
80 × 140 mm135 parts2LNo license0SEthernet PDS Ethernet card for Macintosh SE
rhalkyard
90 × 99 mm40 parts4LGPL-3.0164Omodri sa v2 laas
open-dynamic-robot-initiative
54.8 × 57.6 mm201 parts8LBSD-3-Clause122STM32
Stencil
swiszczoo
150 × 56 mm217 parts2LNo license2Pixfrog satellite
Lefix2
39.9 × 31.5 mm20 parts2LMIT1PIC
Nixie Clock
drewsum
200 × 50 mm266 parts2LNo license0Omodri sa laas
open-dynamic-robot-initiative
54.8 × 57.6 mm194 parts8LBSD-3-Clause122STM32
Main board
swiszczoo
100 × 74 mm125 parts4LNo license2Tune in
svgeesus
38.6 × 24.6 mm27 parts2LMIT2ECE3502 PCB Design Course - Motor Driver Project
MilesMayhew
158.2 × 86 mm48 parts2LNo license1ESP32
Control board
Freimor
90 × 110 mm105 parts4LNo license0Open MOtor DRiver Initiative (OMODRI) - Extension Board
open-dynamic-robot-initiative
50 × 50 mm167 parts6LBSD-3-Clause122ESP32
Control board(2024-10-31 160845)
Freimor
90 × 110 mm105 parts4LNo license0Supply board
swiszczoo
150 × 56 mm38 parts2LNo license2Corridor node
lucanastasio
40 × 40 mm57 parts2LNo license1
How designs wire the 74LVC2G17
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 74LVC2G17 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 1 µF).
- The 2Y_4 pin has a series resistor on 7 of 17 designs, most often 100 kΩ (then 120 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1A_1pin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| 2A_3pin 3 | Connected to: Signal 100% |
|
| 2Y_4pin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 5V 94% |
|
| 1Y_6pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SEthernet PDS Ethernet card for Macintosh SE by rhalkyard, Open MOtor DRiver Initiative (OMODRI) - Extension Board by open-dynamic-robot-initiative, Pixelvation by Pixelvation and 1fNoiseAmplifierRev13 by curtisseizert.
The 74LVC2G17 in open source designs
The gallery holds 25 open source boards using the 74LVC2G17 from 17 GitHub repositories; a typical one measures about 90 × 57.6 mm and carries around 167 components.
52% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is SEthernet PDS Ethernet card for Macintosh SE by rhalkyard.
Parts used alongside the 74LVC2G17
Microcontrollers on boards using the 74LVC2G17
What boards using the 74LVC2G17 are built for
74LVC2G17: common questions
Where can I find a 74LVC2G17 reference design?
Each of the 25 boards on this page is a real design using the 74LVC2G17. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC2G17 VCC pin?
The VCC pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 17 open source designs using the 74LVC2G17.
What resistor goes on the 74LVC2G17 2Y_4 pin?
The 2Y_4 pin has a series resistor on 7 of 17 designs, most often 100 kΩ (then 120 Ω). Counted from the KiCad layouts of 17 open source designs using the 74LVC2G17.
What parts are used alongside the 74LVC2G17?
The AMS1117-3.3, L78L09ACUTR, LP2985-18DBVR, MAX20457ATIF/VY+ and MHT2012NT1 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC2G17 use?
Most are built on STM32 (5), ESP32 (3), RP2040/RP2350 (2) and PIC (1).
How big is a typical board using the 74LVC2G17?
The median is 90 × 57.6 mm, and 52% are two-layer designs.
What is the most popular open source board using the 74LVC2G17?
By GitHub stars, SEthernet PDS Ethernet card for Macintosh SE by rhalkyard, with 164 stars.
Can I simulate one of these boards using the 74LVC2G17 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.