Steno keyboard

Lucas-Luwa·steno-keyboard·V3/hardware/StenoV3.kicad_pcb

Steno keyboard PCB layout, top view — open source RP2040/RP2350 board by Lucas-Luwa

About the Steno keyboard PCB

Steno keyboard is an open source RP2040/RP2350 PCB design by Lucas-Luwa, published on GitHub under the Custom license license. It is a 2-layer board measuring 252 × 68 mm, with 81 components from 8 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the 74AHCT1G125. By type, the board carries 30 switches, 30 diodes, 9 capacitors, 8 LEDs, 1 IC and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

Open StenoV3.kicadpro` in KiCad 10 with the standard symbol, footprint and 3D libraries installed.

Open StenoV3.kicadpro` in KiCad 10 with the standard symbol, footprint and 3D libraries installed.

Bare PCB before component installation. Follow the illustrated build guide for the populated board and switch stages.

A1 uses the generic RaspberryPiPico` symbol, footprint and 3D model. Fit the Waveshare module with its USB-C connector aligned to the case opening.

Steno keyboard, from the project README
From the project README

Main components on the Steno keyboard

Steno keyboard bill of materials (BOM)

81 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74AHCT1G125
U1
1
RaspberryPi_Pico
A1
1
MF_MSMF050-2
F1
30
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +22
8
WS2812C
LED8, LED12, LED13, LED14, LED15, LED16, LED17, LED28
30
1N4148W
D2, D3, D4, D5, D6, D7, D9, D10 +22
9
100N
100n
C1, C2, C3, C4, C5, C6, C7, C8 +1
1
330R
R3

Steno keyboard design files

The KiCad project lives in the Lucas-Luwa/steno-keyboard repository on GitHub; these links point at the commit this page was built from.

Steno keyboard: common questions

What microcontroller does the Steno keyboard use?

The Steno keyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Steno keyboard PCB?

The Steno keyboard measures 252 × 68 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Steno keyboard?

81 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Steno keyboard design files?

From the Lucas-Luwa/steno-keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Steno keyboard design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Steno keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards