Fsk coursekeeper
luftaquila·fsk-coursekeeper·rover/pcb/pcb.kicad_pcb
About the Fsk coursekeeper PCB
Fsk coursekeeper is an open source RP2040/RP2350 PCB design by luftaquila, published on GitHub under the Custom license license. It is a 2-layer board measuring 43 × 63 mm, with 19 components from 18 distinct parts.
Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. Other key parts include the 106990005. By type, the board carries 9 connectors, 5 resistors, 2 ICs, 2 capacitors and 1 transistor.
It belongs with the rf & radio, robotics & motion and displays & leds designs in this gallery.
From the project
Autonomous course marking rover for Formula Student Korea
Course design and cone layout system for Formula Student Korea dynamic events.
Course design on satellite imagery Export as an Assetto Corsa track RTK GPS rover that drives to each cone position and marks it Handheld RTK GPS unit that captures cone positions or serves as the rover's base station * Web console that keeps courses in the browser
1. Open the web console. 2. In Settings, add each device with + Rover or + GPS unit and its address, then click Save. 3. Click the Rover badge in the header and save an NGII account ID under Rover NGII login. Save one for the GPS unit under GPS unit →…
Main components on the Fsk coursekeeper
Fsk coursekeeper bill of materials (BOM)
19 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-ZERO | MODULE_RP2040-ZERO | U1 |
| 1 | 106990005 MP1584EN Seeed Studio | SRT_MPT1584EN_Module | U2 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | BATT | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | E-STOP | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | NAV | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | STEER | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | DUMP | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | TSAL | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | ENC(L) | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | ENC(R) | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | DRIVER | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 3300UF 3300uF | CP_Radial_D10.0mm_P5.00mm | C2 |
| 2 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Fsk coursekeeper design files
The KiCad project lives in the luftaquila/fsk-coursekeeper repository on GitHub; these links point at the commit this page was built from.
Fsk coursekeeper: common questions
What microcontroller does the Fsk coursekeeper use?
The Fsk coursekeeper is built around the RP2040-ZERO, from the RP2040/RP2350 family.
How big is the Fsk coursekeeper PCB?
The Fsk coursekeeper measures 43 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fsk coursekeeper?
19 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fsk coursekeeper design files?
From the luftaquila/fsk-coursekeeper repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fsk coursekeeper design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Fsk coursekeeper without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k