HardLabs

ORCA Control Board

LukeDWaller99·Final-Year-Project·Controller/PCB/controller/controller.kicad_pcb

ORCA Control Board layout, top view — open source AVR/Arduino board by LukeDWaller99
Simulate this board

About the ORCA Control Board

ORCA Control Board is an open source AVR/Arduino PCB design by LukeDWaller99, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 64 components from 25 distinct parts.

Its main chip is the NUCLEO-L432KC, from the AVR/Arduino family. Other key parts include the Joystick, ZSR330GTA, C7950 and ZLDO1117G50TA. By type, the board carries 27 resistors, 11 capacitors, 7 diodes, 5 ICs, 3 transistors and 2 battery holders.

It belongs with the power & battery designs in this gallery.

From the project

nRF24L01P.h Authored by Owen Edwards (c) 2010 (Modified by Luke Waller - 2022) ---- ## Contributions Luke Waller

Main components on the ORCA Control Board

JoystickZSR330GTAC7950ZLDO1117G50TANUCLEO-L432KC

ORCA Control Board bill of materials (BOM)

64 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
Joystick
U1, U2
1
ZSR330GTA
U3
1
C7950
LM358DR2G
U4
1
ZLDO1117G50TA
U5
1
NUCLEO-L432KC
A1
3
C6749
S9013
Q1, Q2, Q3
1
nRF24L01_Conn
J1
2
Bat_18650
BT1, BT2
1
Buzzer
BZ1
4
SW_SPST
Btn_1, Btn_2, Btn_3, RESET1
1
SW_SPDT
PWR_SW1
1
SW_SPDT
SW1
1
C72043
GREEN
D1
2
C8598
B5817W-5819W
D2, D6
2
C72038
YELLOW
D3, D4
2
C72041
BLUE
D5, D7
11
C14663
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +3
8
C4190
2K2
R1, R11, R13, R14, R19, R20, R24, R28
4
C23220
620
R2, R3, R4, R5
3
C23162
4K7
R6, R9, R30
Show 5 more
QtyPartRefs
1
C23153
40K
R8
6
C25804
10K
R10, R12, R15, R16, R21, R26
2
C25803
100K
R17, R18
2
C21190
1K
R29, R31
1
C128550
20K
RV1

ORCA Control Board design files

The KiCad project lives in the LukeDWaller99/Final-Year-Project repository on GitHub; these links point at the commit this page was built from.

ORCA Control Board: common questions

What microcontroller does the ORCA Control Board use?

The ORCA Control Board is built around the NUCLEO-L432KC, from the AVR/Arduino family.

How big is the ORCA Control Board?

The ORCA Control Board measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ORCA Control Board?

64 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ORCA Control Board design files?

From the LukeDWaller99/Final-Year-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ORCA Control Board design in my own project?

The repository has no license, so all rights stay with LukeDWaller99. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ORCA Control Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Final-Year-Project

Similar boards