Glamdring

m-turambar·Glamdring·kicad/transmisor.kicad_pcb

Glamdring PCB layout, top view — open source STM32 board by m-turambar

About the Glamdring PCB

Glamdring is an open source STM32 PCB design by m-turambar, published on GitHub. It is a 4-layer board measuring 48 × 19.9 mm, with 46 components from 33 distinct parts.

Its main chip is the STM32G031F8PX, from the STM32 family. Other key parts include the NRF24L01+, CH330N, XC6206PXXXMR, USBLC6-2SC6 and MPU-6050. By type, the board carries 21 capacitors, 7 resistors, 6 ICs, 4 connectors, 3 inductors and 2 diodes.

From the project

Experiments with STM32 MCUs

El proyecto en usa una capa de abstracción del hardware (HAL) original.

Desarrollo de hardware para: * STM32G031

*********************************************** Dependencias: Compilador ARM-none-eabi. https://developer.arm.com/downloads/-/gnu-rm Flasher OpenOCD: https://openocd.org/pages/getting-openocd.html Drivers de ST. https://www.st.com/en/development-tools/stsw-link009.html

Main components on the Glamdring

Glamdring bill of materials (BOM)

46 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NRF24L01+
U1
1
CH330N
U2
1
XC6206PXXXMR
XC6206PxxxMR
U3
1
STM32G031F8PX
STM32G031F8Px
U4
1
USBLC6-2SC6
U5
1
MPU-6050
U6
1
C13738
16 MHz
Y1
1
C91146
USB_B_Micro
J1
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J2
1
CONN_01X03_FEMALE
Conn_01x03_Female
J3
1
CONN_01X04_FEMALE
Conn_01x04_Female
J4
1
C504007
Antenna_Shield
AE1
1
SW_Push_Dual
SW1
1
C72043
LED_g
D1
1
C2290
LED_w
D2
1
8.2NH
8.2nH
L1
1
3.9NH
3.9nH
L2
1
2.7NH
2.7nH
L3
2
10NF
10nF
C1, C17
1
1NF
1nF
C2
Show 13 more
QtyPartRefs
1
33NF
33nF
C3
2
22PF
22pF
C4, C6
2
2.2NF
2.2nF
C5, C20
1
4.7PF
4.7pF
C7
1
1.5PF
1.5pF
C8
1
1.0PF
1.0pF
C9
1
10UF
10uF
C10
7
100NF
100nF
C11, C12, C14, C16, C18, C19, C21
1
4.7UF
4.7uF
C13
1
1UF
1uF
C15
1
22K
22k
R1
1
1M
R2
5
2.2K
2.2k
R3, R4, R6, R7, R8

Glamdring design files

The KiCad project lives in the m-turambar/Glamdring repository on GitHub; these links point at the commit this page was built from.

Glamdring: common questions

What microcontroller does the Glamdring use?

The Glamdring is built around the STM32G031F8PX, from the STM32 family.

How big is the Glamdring PCB?

The Glamdring measures 48 × 19.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Glamdring?

46 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Glamdring design files?

From the m-turambar/Glamdring repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Glamdring design in my own project?

The repository has no license, so all rights stay with m-turambar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Glamdring without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards