13 open source boards using the CH330N

Real designs built with the CH330N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the CH330N

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CH330N connects to, and the resistors, capacitors and other passives placed on it.

  • The RTS pin is left unconnected on 12 of 13 designs.
  • The VCC pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
  • The V3 pin has a capacitor to GND on 10 of 13 designs, most often 100 nF (then 1 µF).
GNDpin 3Connected to: GND 85%
RTSpin 4Connected to: Not connected 92%
VCCpin 5Connected to: 3.3V 62% · a signal 38%
  • Decoupling capacitor on 77% · 100 nF (9), 10 µF (2), 2.2 µF (1)
RXDpin 7Connected to: The microcontroller 23%
  • Series resistor on 31% · 470 Ω (2), 499 Ω (1), 33 Ω (1)
V3pin 8Connected to: Signal 77% · 3.3V 15%
  • Capacitor to GND on 77% · 100 nF (9), 1 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP8266 Wireless DAP by ZhuYanzhen1, ESP-AHT10-Extra by c-, Forcegauge by szbeni and AM32 AI8051U by Icey7122.

The CH330N in open source designs

The gallery holds 13 open source boards using the CH330N from 13 GitHub repositories; a typical one measures about 60 × 49.6 mm and carries around 69 components.

54% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is ESP8266 Wireless DAP by ZhuYanzhen1.

Microcontrollers on boards using the CH330N

CH330N: common questions

Where can I find a CH330N reference design?

Each of the 13 boards on this page is a real design using the CH330N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CH330N RTS pin connected?

The RTS pin is left unconnected on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the CH330N.

What decoupling capacitors do designs use on the CH330N VCC pin?

The VCC pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the CH330N.

How is the CH330N V3 pin connected?

The V3 pin has a capacitor to GND on 10 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the CH330N.

What parts are used alongside the CH330N?

The USBLC6-2SC6, 24CW1280T-I/OT, AMS1117-3.3, BMI088 and ESP32-WROOM-32 appear in the most repositories here.

Which microcontrollers do boards using the CH330N use?

Most are built on ESP8266 (3), ESP32 (2), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the CH330N?

The median is 60 × 49.6 mm, and 54% are two-layer designs.

What is the most popular open source board using the CH330N?

By GitHub stars, ESP8266 Wireless DAP by ZhuYanzhen1, with 57 stars.

Can I simulate one of these boards using the CH330N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part