Pi tranceiver psu
About the Pi tranceiver psu PCB
Pi tranceiver psu is an open source PCB design by M0LTE, published on GitHub. It is a 2-layer board measuring 60.3 × 36.8 mm, with 16 components from 16 distinct parts.
Other key parts include the LTC4368IMS-2#PBF. By type, the board carries 5 capacitors, 5 resistors, 2 transistors, 2 connectors, 1 IC and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
An attempt to build a complete ham radio transceiver around a Raspberry Pi
Mouser Parts List https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8b7ab50ecd
Main components on the Pi tranceiver psu
Pi tranceiver psu bill of materials (BOM)
16 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC4368IMS-2#PBF | SOP50P490X110-10N | IC1 |
| 1 | BC848W DMT6002LPS-13 | PowerDI5060-8 | Q1 |
| 1 | 2N7002 DMT6002LPS-13 | PowerDI5060-8 | Q2 |
| 1 | CONN_01X06 Anderson_Powerpole_2w | Anderson_powerpole_2w_90 | J1 |
| 1 | C1509221 Anderson_Powerpole_2w | Anderson_powerpole_2w_90 | J2 |
| 1 | SMF4L5.0A 15V | D_0805_2012Metric | D1 |
| 1 | 1NF 220nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10N 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 10N 1nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 865080545012 100uF | CAPAE660X770N | C5 |
| 1 | 4K7 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K 24K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 750K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 220 1M3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 470 22K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
Pi tranceiver psu design files
The KiCad project lives in the M0LTE/pi-transceiver repository on GitHub; these links point at the commit this page was built from.
Pi tranceiver psu: common questions
How big is the Pi tranceiver psu PCB?
The Pi tranceiver psu measures 60.3 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi tranceiver psu?
16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pi tranceiver psu design files?
From the M0LTE/pi-transceiver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pi tranceiver psu design in my own project?
The repository has no license, so all rights stay with M0LTE. Use it as a reference, and ask the author before reusing the design.
More boards in pi-transceiver
RP2040/RP2350HF PA Radio Interface
100 × 100 mm180 parts2LNo license15
Microchip SAMPi TX 35W PA V2
100 × 100 mm161 parts4LNo license15
PA Power V1
100 × 100 mm111 parts4LNo license15
RXLNA
100 × 100 mm86 parts4LNo license15
LPF Relay
75 × 50 mm54 parts2LNo license15
Broadcast Filter
50 × 30 mm45 parts4LNo license15
Raspberry PiInternet Interrupter v1
65 × 56 mm36 parts4LNo license15
PE4302
25 × 40 mm27 parts4LNo license15
Coupler
100 × 40 mm26 parts2LNo license15
Relay RF HF3
30 × 40 mm13 parts4LNo license15
Relay RF G2RL
30 × 50 mm13 parts2LNo license15
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568