RXLNA
About the RXLNA PCB
RXLNA is an open source PCB design by M0LTE, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 86 components from 17 distinct parts.
Other key parts include the AS179-92LF, AMS1117-5.0, AMS1117-3.3, PCF8574A and PSA4-5043. By type, the board carries 46 capacitors, 17 resistors, 9 ICs, 7 connectors, 6 inductors and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
An attempt to build a complete ham radio transceiver around a Raspberry Pi
Main components on the RXLNA
RXLNA bill of materials (BOM)
86 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | AS179-92LF | SOT-363_SC-70-6 | U401, U402, U404, U407, U409 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U403 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U405 |
| 1 | PCF8574A | SOIC-16W_7.5x10.3mm_P1.27mm | U406 |
| 1 | PSA4-5043 | SOT-89-3 | U408 |
| 5 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J401, J402, J403, J406, J407 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J404 |
| 1 | Conn_01x01_Male | Board outline 100_100 | J405 |
| 1 | SMP1330-005LF | SOT-23 | D401 |
| 1 | L_Trim | L_Radial_L10.2mm_W10.2mm_Px7.62mm_Py7.62mm_Pulse_LP-30 | L401 |
| 1 | L | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L402 |
| 4 | L | Pipe22 | L403, L404, L405, L406 |
| 13 | C | C_0805_2012Metric | C401, C402, C403, C404, C410, C412, C415, C416 +5 |
| 11 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C405, C406, C407, C408, C409, C411, C413, C414 +3 |
| 18 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C425, C426, C427, C428, C430, C431, C432, C433 +10 |
| 4 | C_Trim | TrimCap | C429, C434, C439, C444 |
| 17 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R401, R402, R403, R404, R405, R406, R407, R408 +9 |
RXLNA design files
The KiCad project lives in the M0LTE/pi-transceiver repository on GitHub; these links point at the commit this page was built from.
RXLNA: common questions
How big is the RXLNA PCB?
The RXLNA measures 100 × 100 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the RXLNA?
86 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RXLNA design files?
From the M0LTE/pi-transceiver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RXLNA design in my own project?
The repository has no license, so all rights stay with M0LTE. Use it as a reference, and ask the author before reusing the design.
More boards in pi-transceiver
RP2040/RP2350HF PA Radio Interface
100 × 100 mm180 parts2LNo license15
Microchip SAMPi TX 35W PA V2
100 × 100 mm161 parts4LNo license15
PA Power V1
100 × 100 mm111 parts4LNo license15
LPF Relay
75 × 50 mm54 parts2LNo license15
Broadcast Filter
50 × 30 mm45 parts4LNo license15
Raspberry PiInternet Interrupter v1
65 × 56 mm36 parts4LNo license15
PE4302
25 × 40 mm27 parts4LNo license15
Coupler
100 × 40 mm26 parts2LNo license15
Pi tranceiver psu
60.3 × 36.8 mm16 parts2LNo license15
Relay RF HF3
30 × 40 mm13 parts4LNo license15
Relay RF G2RL
30 × 50 mm13 parts2LNo license15
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568