MmWave

m1cha3l-s·mmWave·KiCad/mmWave playkit.kicad_pcb

MmWave PCB layout, top view — open source ESP32 board by m1cha3l-s

About the MmWave PCB

MmWave is an open source ESP32 PCB design by m1cha3l-s, published on GitHub. It is a 2-layer board measuring 20.8 × 27.6 mm, with 3 components from 2 distinct parts.

Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. By type, the board carries 2 diodes and 1 IC.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

[WIP] mmwave sensing project using seeedstudio 24GHz mmwave sensor and xiao esp32-s3

MmWave, from the project README
From the project README

Main components on the MmWave

MmWave bill of materials (BOM)

3 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-S3-DIP
U1
2
SK6812MINI-E
D1, D2

MmWave design files

The KiCad project lives in the m1cha3l-s/mmWave repository on GitHub; these links point at the commit this page was built from.

MmWave: common questions

What microcontroller does the MmWave use?

The MmWave is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.

How big is the MmWave PCB?

The MmWave measures 20.8 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MmWave?

3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MmWave design files?

From the m1cha3l-s/mmWave repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MmWave design in my own project?

The repository has no license, so all rights stay with m1cha3l-s. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MmWave without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards