HardLabs

V0 4-Scale Module

MacNite·HiveHub·pcb-design/scale module/esp32-c6/_V0_4-Scale_Module.kicad_pcb

V0 4-Scale Module layout, top view — open source ESP32 board by MacNite

About the V0 4-Scale Module

V0 4-Scale Module is an open source ESP32 PCB design by MacNite, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 90 mm, with 26 components from 21 distinct parts.

Its main chip is the 113991254, from the ESP32 family. By type, the board carries 17 connectors, 2 test points, 1 IC and 1 switch.

It belongs with the iot & wireless, sensors and power & battery designs in this gallery.

From the project

Open-source ESP32-C6 beehive monitoring hub for scales and sensors. Collects weight, climate, sound, vibration and bee traffic from up to 16 hives, with BLE, OTA, FastAPI/PostgreSQL backend, dashboards, MQTT and tested KiCad hardware.

Current state (as of 9 July 2026): all published PCBs are tested and working.

- Use the XIAO ESP32-C6 on the Scale Module (V0.4) as your main HiveHub controller, populated with the recommended module set: NAU7802 (2 scales), MAX17048 battery gauge, TPS63020 buck-boost, TP4056 USB-C charger, DS3231 RTC, micro-SD module and SHT40. It also collects data from up to 16 BLE in-hive sensors. - Optional, for 3+ scales: add the NAU7802 breakout PCB (v0.2) without an MCU — its TCA9548A I2C multiplexer carries up to 8× NAU7802 for up to 16 wired scales in total. When the breakout/mux is used, install…

Main components on the V0 4-Scale Module

113991254

V0 4-Scale Module bill of materials (BOM)

26 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
113991254
U1
2
Conn_01x01_Socket
J1, J2
1
PowerSelector
J3
1
RTC
J5
1
TPS63020-GND-IN
J6
1
SD-Module
J9
2
PowerIn
J10, J11
1
BatIN
J12
1
DS18B20
J13
1
SHT40 Ambient
J15
1
TPS63020-GND-OUT
J18
1
PowerModuleHeader
J19
1
TPS63020-V-IN
J20
1
NAU7802
J21
1
MAXS17048
J22
1
TPS63020-3.3V-OUT
J23
3
4.7k
1W-4.7k1, SCL-4.7k1, SDA-4.7k1
1
BatteryMAX17048
MAX17048
1
SW_Push
SW1
2
BatteryMAX17048
TP4056+1, TP4056-1
Show 1 more
QtyPartRefs
1
BeeCounter
i2c1

V0 4-Scale Module design files

The KiCad project lives in the MacNite/HiveHub repository on GitHub; these links point at the commit this page was built from.

V0 4-Scale Module: common questions

What microcontroller does the V0 4-Scale Module use?

The V0 4-Scale Module is built around the 113991254, from the ESP32 family.

How big is the V0 4-Scale Module?

The V0 4-Scale Module measures 60 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V0 4-Scale Module?

26 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V0 4-Scale Module design files?

From the MacNite/HiveHub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the V0 4-Scale Module design in my own project?

Yes, under the terms of its MIT license, which MacNite chose for the repository.

Can I test firmware for the V0 4-Scale Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in HiveHub

Similar boards