Keyboard
Magicman5284·keyboard
About the Keyboard PCB
Keyboard is an open source ESP32 PCB design by Magicman5284, published on GitHub. It is a 2-layer board measuring 151 × 120 mm, with 13 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 10 switches, 2 ICs and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
halflife week3 project
This is the project that I made for the 3rd week of the Hack Club Half-Life program. This is what they had a the beginner project, but a made a couple of modifications to make it my own!
One of the major changes I made was adding more keys so that on mine there is a while octave of notes to choose from instead of only 7.
I put the "This is NOT a trumpet" message on the board because I play the trumpet, and I needed a way to not get confused on which instrument I was playing.
Main components on the Keyboard
Keyboard bill of materials (BOM)
13 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | ~ | MPR121_Breakout_claude_Flipped | U2 |
| 1 | Conn_01x12_Pin | Keyboard | J1 |
| 9 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3, SW5, SW6, SW7, SW8, SW9 +1 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
Keyboard design files
The KiCad project lives in the Magicman5284/keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi_keypad.kicad_pcb
- Schematicmidi_keypad.kicad_sch
- BOMBOM.csv
Keyboard: common questions
What microcontroller does the Keyboard use?
The Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Keyboard PCB?
The Keyboard measures 151 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard?
13 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keyboard design files?
From the Magicman5284/keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keyboard design in my own project?
The repository has no license, so all rights stay with Magicman5284. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k