Analog walkie talkie
maheen-ahmed1·analog-walkie-talkie

About the Analog walkie talkie PCB
Analog walkie talkie is an open source PCB design by maheen-ahmed1, published on GitHub under the MIT license. It is a 2-layer board, with 46 components from 34 distinct parts.
Other key parts include the LM386. By type, the board carries 20 capacitors, 11 resistors, 3 switches, 2 transistors, 2 inductors and 1 IC.
It belongs with the rf & radio and audio designs in this gallery.
From the project
Fully analog 27 MHz AM walkie-talki; KiCad schematic + LTspice TX/RX sims and guides, no MCU or RF module + BOM 27mhz-analog-walkie-talkie
Crystal Colpitts with LM386 supply AM — carrier ~27.15 MHz, modulation index ≈ 0.5.
Intended super-regen — collector oscillates continuously; recovered audio ignores the antenna (see quench mod).
Team project — Ahsanullah University of Science and Technology (AUST), Dhaka Communication Engineering Lab · EEE 3208 · KiCad 10 · LTspice 26 · MIT License
The educational goal was to understand a real radio chain, not to wrap a ready made transceiver IC:
Main components on the Analog walkie talkie
Analog walkie talkie bill of materials (BOM)
46 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM386 | U1 | |
| 2 | BC547 | Q1, Q2 | |
| 1 | 27MHz | Y1 | |
| 1 | Whip | ANT1 | |
| 1 | 9V | BT1 | |
| 1 | 5-30P 5-30p | CV1 | |
| 1 | 8R | LS1 | |
| 1 | Electret | MK1 | |
| 1 | 10k log | RV1 | |
| 1 | Power | SW1 | |
| 1 | PTT-A ant | SW2 | |
| 1 | PTT-D AF out | SW3 | |
| 1 | 9T/2T 9T/2T 1.1uH | L1 | |
| 1 | 9T/2T 9T/2T 1.14uH | L2 | |
| 2 | 39N/47N 39n | C1, C6 | |
| 2 | 33P 33p | C2, C7 | |
| 2 | 82P 82p | C3, C8 | |
| 2 | 10N 10n | C4, C9 | |
| 2 | 15P 15p | C5, C10 | |
| 1 | 4N7 4n7 | C11 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.47U/1U 0.47u | C12 | |
| 1 | 0.47U/1U 1u | C13 | |
| 2 | 10U 10u | C14, C15 | |
| 2 | 100U 100u | C16, C20 | |
| 1 | 220U 220u | C17 | |
| 1 | 39N/47N 47n | C18 | |
| 1 | 100N 100n | C19 | |
| 2 | 33K 33k | R1, R5 | |
| 2 | 15K 15k | R2, R6 | |
| 2 | 56R | R3, R7 | |
| 2 | 390R | R4, R8 | |
| 1 | 10K 10k | R9 | |
| 1 | 4K7 4k7 | R10 | |
| 1 | 10R | R11 |
Analog walkie talkie design files
The KiCad project lives in the maheen-ahmed1/analog-walkie-talkie repository on GitHub; these links point at the commit this page was built from.
- Layoutwt27_v5.kicad_pcb
- Schematicwt27_v5.kicad_sch
- BOMBOM.csv
Analog walkie talkie: common questions
How big is the Analog walkie talkie PCB?
The Analog walkie talkie has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog walkie talkie?
46 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Analog walkie talkie design files?
From the maheen-ahmed1/analog-walkie-talkie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Analog walkie talkie design in my own project?
Yes, under the terms of its MIT license, which maheen-ahmed1 chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687