HardLabs

NCR80-ALPS-SKFL

MaiTheSan·NCR80-ALPS-SKFL

NCR80-ALPS-SKFL PCB layout, top view — open source RP2040/RP2350 board by MaiTheSan

About the NCR80-ALPS-SKFL PCB

NCR80-ALPS-SKFL is an open source RP2040/RP2350 PCB design by MaiTheSan, published on GitHub. It is a 2-layer board measuring 349.4 × 133 mm, with 207 components from 24 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and XC6206P. By type, the board carries 88 diodes, 15 capacitors, 8 resistors, 3 ICs, 2 connectors and 1 crystal.

Main components on the NCR80-ALPS-SKFL

W25Q128JVSRP2040XC6206P

NCR80-ALPS-SKFL bill of materials (BOM)

207 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W25Q128JVS
U1
1
RP2040
U2
1
XC6206P
XC6206PxxxMR-Regulator_Linear
U3
1
CSTNE12M
12MHz
Y1
1
Conn_01x04
J1
1
USB DTB 3
J3
1
Fuse
F1
74
1U
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +66
1
2U
MX31
6
1.5U
MX33, MX46, MX82, MX84, MX89, MX91
1
1.25U
MX50
2
2.25U
MX62, MX65
2
1.75U
MX63, MX79
1
2.75U
MX78
1
7U
MX99
1
SW_Push
SW2
85
CD4148W
D1, D2, D3, D4, D5, D6, D7, D8 +77
3
LED
D55, D71, D81
10
100NF
100nF
C1, C3, C4, C7, C8, C9, C10, C11 +2
4
1UF
1uF
C2, C6, C14, C15
Show 4 more
QtyPartRefs
1
10UF
10uF
C5
3
300R
R1, R2, R3
3
1k
R4, R5, R9
2
27R
R6, R7

NCR80-ALPS-SKFL design files

The KiCad project lives in the MaiTheSan/NCR80-ALPS-SKFL repository on GitHub; these links point at the commit this page was built from.

NCR80-ALPS-SKFL: common questions

What microcontroller does the NCR80-ALPS-SKFL use?

The NCR80-ALPS-SKFL is built around the RP2040, from the RP2040/RP2350 family.

How big is the NCR80-ALPS-SKFL PCB?

The NCR80-ALPS-SKFL measures 349.4 × 133 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NCR80-ALPS-SKFL?

207 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NCR80-ALPS-SKFL design files?

From the MaiTheSan/NCR80-ALPS-SKFL repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NCR80-ALPS-SKFL design in my own project?

The repository has no license, so all rights stay with MaiTheSan. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NCR80-ALPS-SKFL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards