MainBoard REMOTE 535721
About the MainBoard REMOTE 535721 PCB
MainBoard REMOTE 535721 is an open source RP2040/RP2350 PCB design by makerio90, published on GitHub. It is a 4-layer board measuring 90.2 × 90.2 mm, with 86 components from 25 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVPIQ, TLC59283DBQR, NCP1117ST12T3G, DRV5033FAQDBZR and AP1509-SG-13. By type, the board carries 30 resistors, 24 capacitors, 17 transistors, 7 ICs, 3 diodes and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
cad/pcba files for a random project
- this project is what kicked it off - and this served as insperation
both work off of the same principle: phisicly rotating an led matrix to create the sense of volume.
this seemed doable so i started work on schematics.
the main board is intended to drive a 32x16 led matrix at a high framerate (>1000fps). new frames will be added to a framebuffer through a rs-485 bus. 12v power will also be supplied. a hall effect sensor will provide a sync signal, allowing the board to make minor ajustments to its framerate. most importently, this whole board rotates around. 12v and rs485 is fed through…
Main components on the MainBoard REMOTE 535721
MainBoard REMOTE 535721 bill of materials (BOM)
86 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVPIQ W25Q128JVS Winbond Electronics | WFDFPN-8-1EP_3x2mm_P0.5mm_EP1.25x1.35mm | U1 |
| 2 | TLC59283DBQR Texas Instruments | DBQ24_TEX | U3, U4 |
| 1 | NCP1117ST12T3G NCP1117-3.3_SOT223 onsemi | SOT-223-3_TabPin2 | U5 |
| 1 | DRV5033FAQDBZR DRV5033FAxDBZ Texas Instruments | SOT-23 | U6 |
| 1 | AP1509-SG-13 AP1509 Diodes Incorporated | SOP-8_5.28x5.23mm_P1.27mm | U7 |
| 1 | RP2040 Raspberry Pi | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U8 |
| 1 | BC846B,215 Nexperia | SOT-323_SC-70 | Q1 |
| 16 | NTA4151PT1G PMOS onsemi | SOT-416 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 +8 |
| 1 | ABM8-272-T3 Abracon LLC | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | GT-USB-7010ASV USB_C_Receptacle_USB2.0_16P G-Switch | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | ST3485EBDR STMicroelectronics | SO-8_STM | Mm_rs485, RX_rs485 |
| 2 | LQW15AN12NH00D D Murata Electronics | D_0402_1005Metric | D1, D3 |
| 1 | TPNSR05F40NXT5G D_Schottky TECH PUBLIC | D_SMB | D2 |
| 1 | SDCHA1V8040-470-R EATON | L_Coilcraft_XAL8080-XXX | L1 |
| 2 | CL21A106KAYNNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric | C1, C2 |
| 16 | CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C3, C4, C6, C8, C9, C10, C11, C12 +8 |
| 2 | CL05A105KP5NNNC 1u Samsung Electro-Mechanics | C_0402_1005Metric | C5, C7 |
| 2 | EEEFP1C471AP 470uF PANASONIC | C_Elec_8x10.2 | C16, C19 |
| 2 | CL05C150JB51PNC 15p Samsung Electro-Mechanics | C_0402_1005Metric | C17, C18 |
| 2 | WR04X270JTL 27 Walsin Tech Corp | R_0402_1005Metric | R1, R5 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | RTT02102JTH 1k ALEC | R_0402_1005Metric | R2, R6, R7, R9 |
| 2 | RC-02U2R61FT 2.65k RC-02U2R61FT | R_0402_1005Metric | R3, R4 |
| 16 | CR0402FF10R0G 10 LIZ Elec | R_0402_1005Metric | R8, R12, R13, R14, R15, R16, R17, R18 +8 |
| 2 | FCR0402F5K1 5.1k VO | R_0402_1005Metric | R10, R11 |
| 4 | CC0402KRX7R7BB104 60 YAGEO | R_0402_1005Metric | R27, R28, R29, R30 |
MainBoard REMOTE 535721 design files
The KiCad project lives in the makerio90/VOLUME_DISPLAY repository on GitHub; these links point at the commit this page was built from.
MainBoard REMOTE 535721: common questions
What microcontroller does the MainBoard REMOTE 535721 use?
The MainBoard REMOTE 535721 is built around the RP2040, from the RP2040/RP2350 family.
How big is the MainBoard REMOTE 535721 PCB?
The MainBoard REMOTE 535721 measures 90.2 × 90.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the MainBoard REMOTE 535721?
86 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MainBoard REMOTE 535721 design files?
From the makerio90/VOLUME_DISPLAY repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the MainBoard REMOTE 535721 design in my own project?
The repository has no license, so all rights stay with makerio90. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MainBoard REMOTE 535721 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in VOLUME_DISPLAY
RP2040/RP2350MainBoard BACKUP 535837
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard BACKUP 535611
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard BACKUP 535721
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard REMOTE 535611
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard REMOTE 535837
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard REMOTE 535404
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard BACKUP 535404
90.2 × 90.2 mm86 parts4LNo license0
RP2040/RP2350MainBoard BASE 535611
90.2 × 90.2 mm80 parts4LNo license0
RP2040/RP2350MainBoard BASE 535404
90.2 × 90.2 mm80 parts4LNo license0
RP2040/RP2350MainBoard BASE 535837
90.2 × 90.2 mm80 parts4LNo license0
RP2040/RP2350MainBoard BASE 535721
90.2 × 90.2 mm80 parts4LNo license0
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350LogicAnalyzer
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Main
google
98 × 71 mm102 parts2LApache-2.02.9k