71 open source boards using the W25Q128JVPIQ
Real designs built with the W25Q128JVPIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3kRP2040/RP2350
PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202RP2040/RP2350
PD240W
theohg
66 × 66 mm213 parts6LCC-BY-NC-4.0125FPGA
ECP5 Mini
joshajohnson
52 × 27 mm99 parts4LCERN-OHL-S-2.091Raspberry Pi
Rp2350 stamp xl hw
solderparty
45 × 25 mm41 parts4LCERN-OHL-1.243FPGA
Karnix ASB-254
Fabmicro-LLC
85 × 56 mm364 parts6LCustom license19RP2040/RP2350
USB-C-FUSB302-PI
bentwire
66.8 × 22 mm64 parts4LMIT12RP2040/RP2350
Gemini
0xCB-dev
18 × 23.3 mm50 parts4LCustom license11FPGA
Ecp5-dev board
medhyal
68 × 43 mm107 parts4LNo license10W25Q-BRD
red-scorp
16 × 23 mm9 parts2LNo license7RP2040/RP2350
Gear40
cosmosalad
269.9 × 93.2 mm208 parts2LNo license6STM32
Goatfc bones
Torie3
30 × 26 mm54 parts4LCC-BY-NC-4.04RP2040/RP2350
Dino z80
rh1tech
99.5 × 80 mm258 parts4LGPL-3.03STM32
Mini-Air
darshg321
41 × 42 mm84 parts2LCERN-OHL-W-2.02RP2040/RP2350
Mouse joystick
peterpolidoro
100 × 80 mm360 parts4LCC-BY-SA-4.01FPGA
Cart ecp5
nelgau
100 × 60 mm145 parts4LNo license1ESP32
Pajoniiir-M1
dvucinozd
175.6 × 220.1 mm223 parts4LNo license0RP2040/RP2350
SUB-00156 REV00
bcdevices
113.4 × 73 mm136 parts4LNo license0STM32
YecnodF405
lmiez
40 × 40 mm116 parts6LGPL-3.00STM32
YecnodF405
limiez1011
40 × 40 mm116 parts6LGPL-3.00RP2040/RP2350
Adsb devboard
vighnesh-sawant
57.9 × 37.5 mm113 parts4LMIT0Pod
rkrafted
24 × 30 mm100 parts6LMIT0ESP32
Trap mini v2
smaohua
54 × 30 mm100 parts4LNo license0STM32
ACwing FC A
ACwing-UAV
40.8 × 40.8 mm98 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0Nordic nRF
Nrf9151-tracker
chgpalmer
50.8 × 22.9 mm96 parts4LNo license0Tmc5160-usb
janelia-kicad
40 × 40 mm94 parts4LNo license0Raspberry Pi
Aerix-20x20
FBIopeningUPP
31 × 31 mm88 parts4LNo license0RP2040/RP2350
MainBoard BACKUP 535404
makerio90
90.2 × 90.2 mm86 parts4LNo license0RP2040/RP2350
PCB
ApolLO-CanSat
55.6 × 55.5 mm82 parts2LNo license0RP2040/RP2350
USB duck v3 POC
Freimor
30 × 47.5 mm78 parts4LMIT0RP2040/RP2350
USB duck v2
Freimor
23 × 37.7 mm66 parts4LMIT0RP2040/RP2350
Funkyboi
Jameswill-Winsock
51 × 30 mm51 parts4LNo license0RP2040/RP2350
Fudge board
mudd-spec
21 × 51 mm50 parts2LNo license0RP2040/RP2350
Mega
1vers1on
49.3 × 51.8 mm49 parts4LNo license0
How designs wire the W25Q128JVPIQ
Read from the KiCad layouts of 46 open source designs, one per repository: what each pin of the W25Q128JVPIQ connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 38 of 46 designs, most often 100 nF (then 1 µF).
- The CS pin has a pull-up to 3.3V on 29 of 46 designs, most often 10 kΩ (then 100 kΩ).
- The CS pin has a series resistor on 24 of 46 designs, most often 1 kΩ (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 72% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 89% |
|
| EPpin 9 | Connected to: GND 76% · not connected 24% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pro V2 by kata0510, PS2 AIO Mainboard by tschicki, PD240W by theohg and ECP5 Mini by joshajohnson.
The W25Q128JVPIQ in open source designs
The gallery holds 71 open source boards using the W25Q128JVPIQ from 48 GitHub repositories; a typical one measures about 57.9 × 51.8 mm and carries around 88 components.
86% use four copper layers or more, and 42% carry an open source license.
The most starred is Pro V2 by kata0510.
Parts used alongside the W25Q128JVPIQ
Microcontrollers on boards using the W25Q128JVPIQ
What boards using the W25Q128JVPIQ are built for
W25Q128JVPIQ: common questions
Where can I find a W25Q128JVPIQ reference design?
Each of the 71 boards on this page is a real design using the W25Q128JVPIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q128JVPIQ VCC pin?
The VCC pin has a decoupling capacitor on 38 of 46 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 46 open source designs using the W25Q128JVPIQ.
What pull-up resistor is used on the W25Q128JVPIQ CS pin?
The CS pin has a pull-up to 3.3V on 29 of 46 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 46 open source designs using the W25Q128JVPIQ.
What parts are used alongside the W25Q128JVPIQ?
The RP2040, USBLC6-2SC6, AMS1117-3.3, APS6404L-3SQR-ZR and ICM-42688-P appear in the most repositories here.
Which microcontrollers do boards using the W25Q128JVPIQ use?
Most are built on RP2040/RP2350 (43), STM32 (10), FPGA (6) and ESP32 (4).
How big is a typical board using the W25Q128JVPIQ?
The median is 57.9 × 51.8 mm, and 14% are two-layer designs.
What is the most popular open source board using the W25Q128JVPIQ?
By GitHub stars, Pro V2 by kata0510, with 2,299 stars.
Can I simulate one of these boards using the W25Q128JVPIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.