Airsoft bomb prop
makerspacelt·airsoft-bomb-prop·hw/airsoft_bomb_v2/airsoft_bomb_v2.kicad_pcb
About the Airsoft bomb prop PCB
Airsoft bomb prop is an open source ESP32 PCB design by makerspacelt, published on GitHub. It is a 2-layer board measuring 71.4 × 76.7 mm, with 36 components from 21 distinct parts.
Its main chip is the MODULE_ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the C22396383 and C6187. By type, the board carries 14 resistors, 6 connectors, 5 capacitors, 4 ICs, 3 transistors and 1 buzzer.
It belongs with the iot & wireless designs in this gallery.
From the project
This is the source code of an Airsoft prop KMS-ANT designed and sold by Kaunas Makerspace.
This is the source code of an Airsoft prop KMS-ANT designed and sold by Kaunas Makerspace.
sw/ - ESPHome-based C++ software licensed under GPL-3.0 hw/ - PCB designed using KiCad and licensed under CERN-OHL-S
You can buy the product here: https://www.tindie.com/products/makerspacelt/airsoft-bomb-prop-kms-ant/
More information: http://armory.makerspace.lt/
Main components on the Airsoft bomb prop
Airsoft bomb prop bill of materials (BOM)
36 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C22396383 PCF8574 | SOIC-16W_7.5x10.3mm_P1.27mm | U1, U2 |
| 1 | ~ | MODULE_ESP32-C3_SUPERMINI | U3 |
| 1 | C6187 AMS1117-5.0 | SOT-223-3_TabPin2 | U4 |
| 3 | C8545 AO3400A | SOT-23 | Q2, Q4, Q5 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | keypad | J1 |
| 1 | CONN_01X16_PIN Conn_01x16_Pin | screen | J2 |
| 1 | BTN_R | HIWA 250-21-2G | J3 |
| 1 | BTN_Y | HIWA 250-21-2G | J4 |
| 1 | SIREN | HIWA 250-21-2G | J5 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal_with_plug | J6 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | C2830246 1A | Fuse_1206_3216Metric | F1 |
| 1 | C719176 10k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | C8598 D | D_SOD-123F | D1 |
| 1 | C49678 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 4 | C45783 22u | C_0805_2012Metric | C2, C3, C4, C5 |
| 6 | C17513 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R6, R7, R8, R9 |
| 5 | C17673 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R10, R11, R23 |
| 1 | C17621 30k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | C17477 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C23231 68k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
Airsoft bomb prop design files
The KiCad project lives in the makerspacelt/airsoft-bomb-prop repository on GitHub; these links point at the commit this page was built from.
Airsoft bomb prop: common questions
What microcontroller does the Airsoft bomb prop use?
The Airsoft bomb prop is built around the MODULE_ESP32-C3_SUPERMINI, from the ESP32 family.
How big is the Airsoft bomb prop PCB?
The Airsoft bomb prop measures 71.4 × 76.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Airsoft bomb prop?
36 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Airsoft bomb prop design files?
From the makerspacelt/airsoft-bomb-prop repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Airsoft bomb prop design in my own project?
The repository has no license, so all rights stay with makerspacelt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Airsoft bomb prop without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k