WZ80 ROM Board
About the WZ80 ROM Board
WZ80 ROM Board is an open source PCB design by makesthingsxyz, published on GitHub under the MIT license. It is a 2-layer board measuring 69.1 × 89.9 mm, with 6 components from 5 distinct parts.
Other key parts include the SST39SF010 and 74LS32. By type, the board carries 2 ICs, 2 resistors, 1 connector and 1 switch.
It belongs with the retro computing designs in this gallery.
From the project
A z80 based computer.
Main components on the WZ80 ROM Board
WZ80 ROM Board bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SST39SF010 | DIP-32_W15.24mm_Socket | U1 |
| 1 | 74LS32 | DIP-14_W7.62mm_Socket | U2 |
| 1 | CONN_01X32 | Pin_Header_Angled_1x32_Pitch2.54mm | J1 |
| 1 | SW_DIP_x02 | SW_DIP_x2_W7.62mm_Slide | SW1 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
WZ80 ROM Board design files
The KiCad project lives in the makesthingsxyz/wz80 repository on GitHub; these links point at the commit this page was built from.
WZ80 ROM Board: common questions
How big is the WZ80 ROM Board?
The WZ80 ROM Board measures 69.1 × 89.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WZ80 ROM Board?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the WZ80 ROM Board design files?
From the makesthingsxyz/wz80 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WZ80 ROM Board design in my own project?
Yes, under the terms of its MIT license, which makesthingsxyz chose for the repository.
More boards in wz80
Similar boards
Amiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Atari pickup
26.4 × 53.9 mm7 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k