Sensor v3
makizusi·-circuit·sensor_v3/sensor_v3.kicad_pcb
About the Sensor v3 PCB
Sensor v3 is an open source STM32 PCB design by makizusi, published on GitHub. It is a 2-layer board measuring 98 × 98 mm, with 20 components from 17 distinct parts.
Its main chip is the STM32F446RETX, from the STM32 family. By type, the board carries 16 connectors, 1 IC, 1 switch, 1 LED and 1 resistor.
It belongs with the sensors designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
作成した回路
https://github.com/makizusi/-circuit/blob/main/%E8%A8%AD%E8%A8%88%E6%84%8F%E5%9B%B3.pdf
Main components on the Sensor v3
Sensor v3 bill of materials (BOM)
20 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETX ~ | STM32F446RE_Nucleo | U1 |
| 1 | LS8 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J1 |
| 1 | LS6 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J2 |
| 1 | LS4 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J3 |
| 1 | LS1 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J4 |
| 4 | encoder | JST_XA_S04B-XASK-1_1x04_P2.50mm_Horizontal | J5, J6, J7, J8 |
| 1 | LS7 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J9 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J11 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J12 |
| 1 | CAN1 Conn_01x04 | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J13 |
| 1 | CAN2 Conn_01x04 | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J14 |
| 1 | SERIAL2 LS5 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J15 |
| 1 | SERIAL3 LS3 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J16 |
| 1 | LS2 | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J17 |
| 1 | KHS42E | NE555DR | S2 |
| 1 | 5v | LED_0603_1608Metric | LED1 |
| 1 | 4.7k | R_0603_1608Metric | R1 |
Sensor v3 design files
The KiCad project lives in the makizusi/-circuit repository on GitHub; these links point at the commit this page was built from.
Sensor v3: common questions
What microcontroller does the Sensor v3 use?
The Sensor v3 is built around the STM32F446RETX, from the STM32 family.
How big is the Sensor v3 PCB?
The Sensor v3 measures 98 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor v3?
20 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor v3 design files?
From the makizusi/-circuit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensor v3 design in my own project?
The repository has no license, so all rights stay with makizusi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sensor v3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in -circuit
Earlier revisions in the repo: sensor_v2, sensor_v1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k